SDS

Page 4 / 9
RD-0038OPP - Onetime Lightweight Spackling
Revision Date: 25-Sep-2013
Precautions for safe handling
Advice on Safe Handling Keep out of reach of children & pets. Do not take internally. Do not breathe vapors or dust.
If dry sanding use NIOSH-approved dust mask. Use only w/ adequate ventilation. Wash
thoroughly after handling. Avoid contact w/ eyes, skin & clothing. Open windows & doors to
ensure cross-ventilation & fresh air during application & curing. Do not eat or drink while
handling this material. In event of spill – see Section 6.
Conditions for safe storage, including any incompatibilities
Storage Conditions Stable under normal conditions of handling, use & storage. Store containers in a cool, dry
location, away from direct sunlight & high temperatures. Protect from freezing. Store away
from incompatible materials (caustics & oxidizers). Close container after each use & keep
tightly closed when not in use. To maximize shelf life, store @ temperatures below 26C
(80F).
Incompatible Materials Oxidizing agents, Caustics.
Exposure Guidelines Exposure guidelines / protective equipment are for routine handling and accidental spills
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Soda lime borosilicate glass
65997-17-3
TWA: 1 fiber/cm3 respirable
fibers: length >5 µm, aspect ratio
>=3:1, as determined by the
membrane filter method at
400-450X magnification [4-mm
objective], using phase-contrast
illumination
TWA: 5 mg/m
3
inhalable fraction
-
-
Ground Mica
12001-26-2
TWA: 3 mg/m
3
respirable
fraction
(vacated) TWA: 3 mg/m
3
respirable dust <1% Crystalline
silica
TWA: 20 mppcf <1% Crystalline
silica
IDLH: 1500 mg/m
3
TWA: 3 mg/m
3
containing <1%
Quartz respirable dust
Calcium Carbonate
1317-65-3
-
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
fraction
(vacated) TWA: 15 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable dust
Titanium Dioxide
13463-67-7
TWA: 10 mg/m
3
TWA: 15 mg/m
3
total dust
(vacated) TWA: 10 mg/m
3
total
dust
IDLH: 5000 mg/m
3
Ceramic Filler
66402-68-4
STEL: 10 mg/m
3
Zr
TWA: 5 mg/m
3
Zr TWA: 0.02
mg/m
3
Mn
TWA: 0.1 mg/m
3
Mn
TWA: 5 mg/m
3
Zr
(vacated) TWA: 5 mg/m
3
Zr
(vacated) STEL: 10 mg/m
3
Zr
IDLH: 25 mg/m
3
Zr
TWA: 5 mg/m
3
except Zirconium
tetrachloride Zr
STEL: 10 mg/m
3
Zr
Appropriate engineering controls
Engineering Controls Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS. Provide appropriate local exhaust ventilation if
material is to be sanded.
Individual protection measures, such as personal protective equipment
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
7. HANDLING AND STORAGE