SDS

RD-0050CP - Pre-mixed Concrete Patch Acrylic Textured Gray -
Tub
Revision Date: 25-Sep-2013
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 9
Incompatible Materials
Strong oxidizing agents. Strong bases.
Exposure Guidelines
Exposure guidelines / protective equipment are for routine handling and accidental spills
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Crystalline silica
14808-60-7
TWA: 0.025 mg/m
3
respirable
fraction
(vacated) TWA: 0.1 mg/m
3
respirable dust
: (30)/(%SiO2 + 2) mg/m
3
TWA
total dust
: (250)/(%SiO2 + 5) mppcf
TWA respirable fraction
: (10)/(%SiO2 + 2) mg/m
3
TWA
respirable fraction
IDLH: 50 mg/m
3
respirable dust
TWA: 0.05 mg/m
3
respirable
dust
Calcium Carbonate
1317-65-3
-
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
fraction
(vacated) TWA: 15 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable dust
Titanium dioxide
13463-67-7
TWA: 10 mg/m
3
TWA: 15 mg/m
3
total dust
(vacated) TWA: 10 mg/m
3
total
dust
IDLH: 5000 mg/m
3
Carbon Black
1333-86-4
TWA: 3 mg/m
3
inhalable fraction
TWA: 3.5 mg/m
3
(vacated) TWA: 3.5 mg/m
3
IDLH: 1750 mg/m
3
TWA: 3.5 mg/m
3
TWA: 0.1 mg/m
3
Carbon black in
presence of Polycyclic aromatic
hydrocarbons PAH
Appropriate engineering controls
Engineering Controls
Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS.
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Use approved safety goggles or safety glasses. If necessary, refer to appropriate
regulations & standards.
Skin and Body Protection
Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for spill
response. If necessary, refer to appropriate regulations & standards.
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit). If necessary,
refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)or appropriate
Standards of Canada. Use foot protection, as described in appropriate regulations &
standards.
Respiratory Protection
If mists or sprays are created, use appropriate respiratory protection. Oxygen levels below
19.5% considered IDLH by OSHA. In such instances, use full-facepiece pressure demand
SCBA or a full facepiece, supplied air respirator w/ auxillary self-contained air supply.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice.