SDS

RD-0050CP - Pre-mixed Concrete Patch – Acrylic – Textured Gray -
Tub
Revision Date: 25-Sep-2013
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 5 / 9
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical State
Textured paste
Appearance
Gray
Odor
Mild acrylic
Color
Gray
Odor Threshold
Not determined
Property
Note: The information below is not
intended for use in preparing
product specifications
Remarks • Method
pH
7.0-10.0
Melting Point/Freezing Point
< 0 °C / <32 °F
Boiling Point/Boiling Range
Not Established
Flash Point
> 93.33 °C / > 200 °F
Evaporation Rate
Not determined
Flammability (Solid, Gas)
Not determined
Upper Flammability Limits
Unknown
Lower Flammability Limit
Unknown
Vapor Pressure
Not established
Vapor Density
Heavier than air
Specific Gravity
~1.75-2.25
@ 25 °C (77 °F)
Water Solubility
Appreciable before cure
Solubility in other solvents
Not determined
Partition Coefficient
Not determined
Autoignition Temperature
Unknown
Decomposition Temperature
Not determined
Kinematic Viscosity
Not determined
Dynamic Viscosity
Not determined
Explosive Properties
Not determined
Oxidizing Properties
Not determined
VOC Content (%)
<1.5%
VOC Content
<25 g/L
10. STABILITY AND REACTIVITY
Reactivity
Cures upon contact with air.
Chemical Stability
Stable under recommended storage conditions.
Possibility of Hazardous Reactions
None under normal processing.
Hazardous Polymerization
Hazardous polymerization does not occur.
Conditions to Avoid
Incompatible Materials. Excessive heat or cold.
Incompatible Materials
Strong oxidizing agents. Strong bases.
Hazardous Decomposition Products
Thermal decomposition can generate irritating dust, fumes & toxic gases.