SDS

_____________________________________________________________________________________________
RD-0055 - Glazing Compound – Gun Grade - Acrylic – White
Revision Date: 26-Jun-2013
Product Information
Eye Contact
Eye contact may result in tearing, redness & pain.
Skin Contact
Prolonged and frequent contact may cause redness and irritation. Repeated skin contact
may cause dermatitis.
Inhalation
Overexposure to vapors during application & curing may mildly irritate respiratory tract &
result in coughing & sneezing.
Ingestion
May cause gastrointestinal irritation, nausea, diarrhea, and vomiting.
Component Information
Chemical Name Oral LD50 Dermal LD50 Inhalation LC50
Titanium dioxide
13463-67-7
> 10000 mg/kg ( Rat ) - -
Ammonium Hydroxide
7664-41-7
= 350 mg/kg ( Rat ) - = 5.1 mg/L ( Rat ) 1 h = 2000 ppm
( Rat ) 4 h
Petroleum Hydrocarbon
64742-48-9
> 5000 mg/kg ( Rat ) > 3160 mg/kg ( Rabbit ) -
Information on physical, chemical and toxicological effects
Symptoms
Please see section 4 of this SDS for symptoms.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Sensitization
Not known to be human skin or respiratory sensitizers.
Carcinogenicity
The table below indicates whether each agency has listed any ingredient as a carcinogen.
Titanium dioxide is a possible carcinogen when it appears as a respirable dust. Trace
residual Formaldehyde present in base emulsion viewed as possible cancer hazard.
Chemical Name ACGIH IARC NTP OSHA
Soda lime borosilicate glass
65997-17-3
Group 3
Titanium dioxide
13463-67-7
Group 2B X
IARC (International Agency for Research on Cancer)
Group 2B - Possibly Carcinogenic to Humans
Group 3 IARC components are "not classifiable as human carcinogens"
OSHA (Occupational Safety and Health Administration of the US Department of Labor)
X - Present
Target organ effects
Acute: Eyes & Skin. Chronic: Skin.
Numerical measures of toxicity
Not determined
12. ECOLOGICAL INFORMATION
_____________________________________________________________________________________________
Ecotoxicity
PRACTICES SHOULD BE AIMED AT ELIMINATING ENVIRONMENTAL CONTAMINATION.
not tested for aquatic or animal toxicity. Release of product to terrestrial, atmospheric & aquatic environments should be avoided.
Page 6 / 9
Component Information