SDS

Page 4 / 8
RD-0081 - Silicone Sealant Acetoxy Cure Clear, White & Colors
Revision Date 26-Mar-2013
Storage Conditions Keep container closed & store away from water or moisture.
Incompatible Materials Oxidizing material can cause a reaction. Water, moisture or humid air can cause hazardous
vapors to form as described in Section 8.
Exposure Guidelines Exposure guidelines / protective equipment are for routine handling and accidental spills
ACGIH TLV
OSHA PEL
NIOSH IDLH
-
(vacated) TWA: 6 mg/m
3
<1%
Crystalline silica
TWA: 20 mppcf
: (80)/(% SiO2) mg/m
3
TWA
IDLH: 3000 mg/m
3
TWA: 6 mg/m
3
TWA: 10 mg/m
3
TWA: 15 mg/m
3
total dust
(vacated) TWA: 10 mg/m
3
total
dust
IDLH: 5000 mg/m
3
Other Information Acetic acid is formed upon contact w/ water or humid air. Provide adequate ventilation to
control exposures within guidelines of OSHA PEL: TWA 10 ppm & ACGIH TLV: TWA 10
ppm, STEL 15 ppm.
Appropriate Engineering Controls
Engineering Controls Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS. Good general ventilation should be sufficient.
Individual Protection Measures, such as Personal Protective Equipment
Eye/Face Protection Safety glasses as a minimum for protection.
Skin and Body Protection Wear suitable protective clothing.
Respiratory Protection No special equipment needed.
General Hygiene Considerations Note: These precautions are for room temperature handling. Use @ elevated temperature
or aerosol/spray applications may require added precautions. Handle in accordance with
good industrial hygiene and safety practice. Wash @ mealtime & end of shift. Contaminated
clothing & shoes should be removed as soon as practical & thoroughly cleaned before
reuse.
Information on Basic Physical and Chemical Properties
Physical State
Appearance
Paste
Clear/opaque or colored paste
Odor
Acetic Acid Odor (Vinegar
odor)
Color
Various
Odor threshold
Not determined
Property
pH
Values
Not determined
Remarks • Method
Melting point/freezing point
Not determined
Boiling point/boiling range
Not determined
Flash point
Not applicable
Evaporation rate
Not determined
Flammability (solid, gas)
Not determined
Flammability limits in air
9. PHYSICAL AND CHEMICAL PROPERTIES
8. EXPOSURE CONTROLS/PERSONAL PROTECTION