Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 100

8. The media will need to be formatting by the camera before usIMPORTANT: After connecting REDMAG 1.8”

SSD to the camera and BEFORE recording, you should format the media using the camera (even if format-

ting was previously performed on a computer). For more information, go to FORMAT MEDIA..

WINDOWS

1. Connect the REDMAG 1.8” SSD via RED STATION REDMAG 1.8”.

2. Open Windows Explorer.

3. Double-click on the drive you wish to erase files from.

4. Select all the files on the drive you wish to erase.

IMPORTANT: Before performing the next step, double-check that this is the correct SSD that you wish to

erase DATA FROM.

5. Press the Delete key on the keyboard.

6. When the pop up window appears click Yes.

NOTE: The media will need to be formatting by the camera before use.

MEDIA MENUA

The Media Menu is used to format media (SSD) prior to use on the camera as well as to Eject (unmount) the

media prior to removal from the camera. Available options when selected are SELECT MEDIA, FORMAT MEDIA,

EJECT MEDIA, and UTILITIES.

IMPORTANT: Media MUST be ejected from the camera before removal to prevent corruption and/or loss of data

on media.

SELECT MEDIA

Allows you to select the Media location to be used by the camera. Default is the SIDE SSD (S-SSD) MODULE.

FORMAT MEDIA

When selected, a new dialog box will appear allowing you to add properties to the media highlighted in the Cur-

rent Media box when formatting. Available options are REEL NO, CAM ID, CAM POS, and FORMAT to format

the media with the values entered.

NOTE: If clips are present on the media, you will be informed of how many clips will be erased when you format

the media.

REEL NO.

When selected a keypad will appear allowing you to enter a value between 1 and 999.

CAMERA ID (SLATE)

Identifies the camera with a letter A through Z. Default is A.

CAMERA POS (POSITION)

Identifies the camera position as Right, Left or Center. Default is Center.

EDGE TIMECODE START

Users may manually enter an Edge Timecode value (seldom used).

FORMAT

When selected, formats the media and adds the selected properties.