Specifications

COPYRIGHT © 2013 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.1, REV-A | 114
8. Go back to REDMOTE Upgrade Utility and click Connect to establish communication with the REDMOTE.
Connection is Established With REDMOTE will be displayed when connected. If the connection is not es-
tablished, then disable all internet connections and try again.
9. Go to “Upgrade REDMOTE Firmware (Macintosh)” on page 114.
UPGRADE REDMOTE FIRMWARE (MACINTOSH)
The following information will guide you through proper updating of your REDMOTE firmware.
1. Download and save the REDMOTE_Firmware_vX.X.XX.zip file located at https://support.red.com.
NOTE: Always review the read_me_installing_redmote_vX.X.XX instructions contained in the REDMOTE_Firm-
ware_vX.X.XX.zip file.
2. Uncompress the zip file.
3. Open the REDMOTE_Firmware_vX.X.XX folder.
4. Click Select File in REDMOTE Upgrade Utility.
5. Navigate to the redmote.1.bin file located in the REDMOTE_Firmware_vX.X.XX folder and click Open.
Selected File: redmote.1.bin will then be displayed.
6. Click Start Upgrade.
File Transfer Progress will be displayed.
REDMOTE will display Upgrading Firmware… with a Green status bar showing upgrade progress. REDMOTE
will also display UPGRADE during this process. Upgrade process can also be tracked on another display.
Once the File Transfer Status is completed, the REDMOTE Upgrade Utility will display Firmware Upgrade
Successfully Done.
7. Click OK.
8. Click Disconnect to close the REDMOTE Upgrade Utility.
REDMOTE will reboot.
REDMOTE will display POWER UP and then SEARCHING once the upgrade has completed.
9. Select Cancel.
10. Go to Settings > Maintenance > System Status > Camera Info and verify the current REDMOTE firmware ver-
sion.
REDMOTE upgrade is complete and you can now attach it to the DSMC brain.
NOTE: Pairing of the REDMOTE may not be necessary after upgrading the REDMOTE firmware, however,
after upgrading the camera firmware you must pair the REDMOTE again.
UPGRADE REDMOTE (WINDOWS)
INSTALL REDMOTE UPGRADE UTILITY (WINDOWS)
The REDMOTE Upgrade Utility allows you to upgrade the firmware on your REDMOTE.
NOTE: After firmware has been upgraded through the REDMOTE Upgrade Utility, the REDMOTE must be paired
to the camera again.
1. Download the DSMC_Resources_vX.X.zip file located at https://www.red.com/downloads.
2. Uncompress the zip file.
3. Open the DSMC_Resources_vX.X folder.
4. Open the Win folder.
5. Open REDMOTE_upgrade_setup.exe.
6. Click Extract All.
7. Select a destination and extract files.