Specifications

RED DSMC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0020_V5.1, REV-A | 115
8. Click Extract.
9. Open the DSMC_Resources_vX.X folder.
10. Open the REDMOTE_Upgrade_Utility folder.
11. Open the Win folder.
12. Open the REDMOTE_upgrade_setup.exe.
NOTE: If you receive an error when attempting to install the REDMOTE Upgrade Utility, right-click the setup
file and select Run as Administrator to proceed.
13. Select I Agree to the License Agreement.
14. Select Install REDMOTE Firmware and click Next.
15. Choose location to install the REDMOTE Upgrade Utility and click Next.
16. Select the Start Menu folder you would like to create the shortcut and click Install.
17. Click Close after setup completes successfully.
18. Go to “Configure REDMOTE Connection with Computer (Windows)” on page 115.
CONFIGURE REDMOTE CONNECTION WITH COMPUTER (WINDOWS)
The next step in upgrading REDMOTE firmware is to establish communication between the computer and the
REDMOTE.
1. Connect a USB to mini-USB cable between the PC and the USB connector on the REDMOTE.
If connecting for the first time, a RNDIS/Gadget driver will be installed on the system.
When the driver is installed, the battery charge indicator will flash on the REDMOTE.
NOTE: If the REDMOTE will not connect to the PC, please refer to the read_me_installing_redmote_vX.X.XX
file in the REDMOTE_Firmware_vX.X.XX folder for manual setup of network connection instructions or contact
RED SUPPORT for assistance at https://support.red.com.
2. Open the REDMOTE_update program from the Start Menu folder you created the shortcut for.
3. Click Connect to establish communication between the REDMOTE and REDMOTE_update.
“Connection is Established With REDMOTE” will be displayed when connected. If the connection is not
established, then disable all internet connections and try again.
4. Go to “Upgrade REDMOTE Firmware (Windows)” on page 115.
UPGRADE REDMOTE FIRMWARE (WINDOWS)
The following information will guide you through proper updating of your REDMOTE firmware.
1. Download and save the REDMOTE_Firmware_vX.X.XX.zip file located at https://www.red.com/downloads.
NOTE: Always review the read_me_installing_redmote_vX.X.XX instructions contained in the REDMOTE_Firm-
ware_vX.X.XX.zip file.
2. Uncompress the zip file.
3. Open the REDMOTE_Firmware_vX.X.XX folder.
4. Click Select File in REDMOTE Upgrade Utility.
5. Navigate to the redmote.1.bin file located in the REDMOTE_Firmware_vX.X.XX folder and click Open.
Selected File: redmote.1.bin will then be displayed.
6. Click Start Upgrade.
File Transfer Progress will be displayed.
REDMOTE will display Upgrading Firmware… with a Green status bar showing upgrade progress. REDMOTE
will also display UPGRADE during this process. Upgrade process can also be tracked on another display.
Once the File Transfer Status is completed, the REDMOTE Upgrade Utility will display Firmware Upgrade
Successfully Done.