Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 118

MIC-1, MIC-2 (MICROPHONE AUDIO)

Two 3.5mm phone jacks on the front of the brain support two independent channels of balanced or unbalanced

microphone level analog audio inputs.

PIN SIGNAL DESCRIPTION DIRECTION

TIP IN + Mic Input (+48V Phantom Power) In

RING IN - Mic Input (+48V Phantom Power) In

SLEEVE GND Camera ground N/A

Microphone Level analog audio input signals are routed via a high quality pre-amplifier and soft limiter, whose

Gain may be controlled using the Input Level control to achieve the desired audio reference/recording level.

Microphone inputs support +48V @ 10mA Phantom Power as a user selectable option.

To assist with reference level setup, the camera provides a color-coded Peak Level Meter in the Graphical User

Interface, with witness marks that indicate 0dBu (-20dbFS) and 0Vu (-16dBFS) levels.

Peak Level Meter range is –36dBu to +20dBu (-54dBFS to 0dBFS) and provides input clip indication.

NOTE: A pre-fabricated XLR to TRS interface cable, the XLR MICROPHONE CABLE (P/N 790-0229), is available

from RED Digital Cinema.

Microphone Input Connector