Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 136

 Pre-packaged lens cleaner containing any additives, such as detergent, anti-static, fragrance, etc.

For proper cleaning and storage, remember to protect the RED TOUCH LCD by storing it in the RED Microfiber

bag.

EVF

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the viewfinder lens. Ensure your spray the solution onto the pad and not directly onto

the lens surface.

REDMOTE SCREEN

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the screen on Touchscreen and Non-Touchscreen LCDs.

LENSES

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the viewfinder lens. Ensure your spray the solution onto the pad and not directly onto

the lens surface.

SIDE HANDLE LCD

Use Pancro Professional Lens Cleaner (P/N PANCROCLN) and Photographic Solutions PEC*PADs (P/N 05011)

or equivalent to clean the screen on the SIDE HANDLE LCD.

BACK FOCUS ADJUSTMENT

WARNING: There is a Screw-In metal plug installed in the camera body covering the back focus screw. This plug

must be removed before performing a back focus adjustment. To remove the plug, use a T10 Torx driver.

NOTE: To perform this procedure as written, you must have a PL mount and RED Focus

™

. For more information

on using the RED Focus, see the RED Focus Operation Guide, available at www.red.com/downloads.

Back focus is adjusted by turning the back focus adjustment on the top of the camera’s front plate using a T10

Torx driver. This screw is indicated by a Siemens Star with an arrow pointing to its location.

1. Remove the screw-in plug located in the back focus adjustment opening using a T10 Torx driver.

2. Place the camera on a level, stable surface or mount the camera on a tripod.

3. Install RED Focus to the camera PL mount.

Back Focus Adjustment Location