Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 35

 Frame Rate: Current frame capture rate

 Genlock: Indicates presence of valid Genlock signal/HD-SDI sync to genlock

 HDR Mode: Displays HDRx mode status

 Histogram: RGB Histogram.

 ISO: Camera sensitivity

 LAN: Indicates communication via Ethernet connection

 Lens Info: Lens information when using specific Canon or Cooke lenses

 Magnify: Tallies 1:1 if magnify is selected

 Media Status: Media location and remaining media capacity in %

 Menu: Acces the Advanced Menus.

 Next Clip Filename: Filename of the clip that will be shot next

 Noise Level Bar: Relative number of RAW pixels in noise

 Power: Indicates DC supply voltage or % of remaining battery capacity Including current supply voltage

 Record/Playback Toggle: Toggles between Record and Playback modes

 REDCODE: REDCODE setting

 Resolution: Record Resolution

 RIG: Indicates 3D rig metadata is present

 RM: Indicates communication to REDMOTE

 Shutter Speed: Exposure time or shutter angle

 Shutter Sync: Indicates sensor shutter sync status

 TC: Indicates presence of valid SMPTE timecode signal and Jam Sync status

 Temperature: Displays camera sensor and core temperature in that order (xx/xxC)

 Timecode: Current timecode value

 White Balance: Color Temperature

The GUI is broken down into the following three main sections: the Upper Status Row, the Live Action Area,

and the Lower Status Row. On VIEWFINDER output(s), all three sections are visible, on PREVIEW outputs only

the Live Action Area and associated graphic overlays are visible. On PROGRAM outputs, none of the graphic

overlays are visible, i.e. a PROGRAM output is defined to be a CLEAN FEED output.

UPPER STATUS ROW

Provides immediate feedback on the most critical image composition parameter settings, including (from Left

to Right):

 Playback Access (Touchscreen)

 Current frame capture rate

 ISO Rating

 Shutter Speed (or Shutter Angle)

 White Balance

 Record Resolution

 Record Quality

Whichever parameter is underlined with a red bar may be immediately adjusted by pressing ENTER in the

Navigation Group of the SIDE HANDLE or REDMOTE, then using the Scroll Wheel to change the value of that

parameter. To confirm the parameter change press ENTER a second time.

NOTE: Shutter angle is displayed in Absolute mode by default, as indicated by Yellow text.

If the red bar is not on the parameter you wish to change, first use the Scroll Wheel to position the red bar un-

der that parameter, then press ENTER, adjust with the Scroll Wheel and press ENTER a second time to confirm