Specifications

COPYRIGHT © 2013 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.1, REV-A | 38
RAW NOISE LEVEL BAR
The RAW noise bar displays the amount of pixels in the image that are in noise. For example, if the bar is about
1/8 of the total height, this would indicate approximately 1/8 of the total pixels in the image are at an exposure
level at risk of displaying noise when pushed at higher ISO or FLUT values in post-production.
RAW CLIP LEVEL BAR
The RAW clip level bar displays the amount of pixels in the image that are clipping. For example, if the bar is
about 1/4 of the total height, this would indicate approximately 1/8 of the total pixels in the image are at an ex-
posure level at risk of clipping and may not be recoverable by lowering ISO or FLUT values in post-production.
SIDE HANDLE
As you navigate and adjust settings in the Basic Menus they will be reflected on the SIDE HANDLE LCD display.
The display elements include:
 Frame Rate: Image capture rate
 ISO Rating: Camera sensitivity
 Power: Camera power status (DC Shown)
 REDCODE: REDCODE setting
 Resolution: Recording Resolution
 Shutter Speed: Exposure time or shutter angle
 White Balance: Color Temp
REDMOTE
The display elements include:
 Battery Indicator: Displays battery life or charge status (shown) of REDMOTE
 Camera ID: Displays camera ID (DEFAULT shown)
 Clip Filename: Filename of the clip that will be shot
 Clip Meter: RGB sensor RAW clipping status
 False Color Mode: Displays false color overlay mode
 Frame Rate: Current frame capture rate
 Genlock: Indicates presence of valid Genlock signal/HD-SDI sync to genlock
 HDR Mode: Displays HDRx mode status
 Histogram: RGB Histogram
 ISO: Camera sensitivity
 LAN: Indicates communication via Ethernet connection
 Magnify: Tallies 1:1 if magnify is selected
 Media Status: Media location and remaining media capacity in %
 Power: Indicates D.C supply voltage or % of remaining battery capacity Including current supply voltage
 Project Frame Rate: Current project TIME BASE
 REDCODE: REDCODE setting
 Resolution Recording Resolution
 RIG: Indicates 3D rig metadata is present
 Shutter Speed: Exposure time or shutter angle
 Shutter Sync: Indicates sensor shutter sync status
 TC: Indicates presence of valid SMPTE timecode signal