Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 90

points.

A line for each rack point displays, indicated by the letters A, B, C, and D. The focus distance displays for

each rack point.

8. If needed, select Re-Autofocus to run the autofocus algorithm, which resets the focus distance to the focus

distance calculated by the algorithm.

9. To set a rack point location, follow the instructions below:

A. Select the rack point that you want to set: A, B, C, or D.

B. Exit the Rack tab to return to the main screen.

C. Press and hold the touchscreen LCD on the location where you want the rack point to be.

D. You can also press and drag the rack point to another location.

When you move a rack point, the camera autofocuses.

10. After setting up all of your rack points, press the key that is mapped to AF: Start (default is SH Record Half

Press) to cycle to the next rack point in order (A, B, C, and D).

For example, if rack point A is currently selected when you trigger the AF: Start action, the focus racks from

point A to point B.