Manualshelf

User Guide

ManualsBrandsRED DIGITAL CINEMA ManualsDigital Cine CamerasDSMC2 BRAIN with MONSTRO 8K VV Sensor
161162163164165166167168169170
PHANTOM POWER
The 3-pin XLR connectors on the DSMC2 REDVOLT Expander and DSMC2 Production Module provide +48 V
phantom power.
Enable phantom power (via the switch adjacent to the XLR port) after a microphone is connected. Disable phantom
power (by switching to Line or Mic) before removing the microphone.
PRE-AMP GAIN
The range and default depends on the attached expander.
To adjust amplification levels, follow the instructions below:
1. Go to Menu > Settings > Audio > Control > Pre-Amp Gain.
2. Move the Pre-Amp (pre-amplifier) sliders up and down to adjust the amplification levels.
3. To link the amplification for each channel, select Link.
Figure: Pre-Amp Gain
C OPYRI GHT © 2019 R E D.C OM , LLC 955-0 1 6 7_V 7.1, REV- M | 166
DSMC2 MONSTRO OPERATION GUIDE