User Guide

LENS

To access the Lens menu, go to Menu > Settings > Setup > Lens.

LENS TAB

The options displayed on the Lens tab change based on the attached lens mount.

PL MOUNT

Enable Power to Lens: Ensures that the camera powers the lens via the lens mount. This feature is enabled by

default, but the camera saves the last selected setting. Deselect when using a Fujinon

T2.9 Cabrio Premier PL

lens. If you disable this feature for the Fujinon Cabrio, re-enable it when using other lenses. For more information,

go to "Fujinon T2.9 Cabrio Premier PL Lenses" on page250.

Auto-Detect PL Lenses: By default, this feature is enabled.

Detect Lens: Detects a lens, if one is attached.

CANON AND NIKON LENS SETTINGS

The options below display when a DSMC Nikon Mount or DSMC Canon Mount is installed with a supported lens.

Aperture: Enter the aperture value. The range and default depend on the lens.

Focus: Use the slider to change the focal distance. Manually changing the focal distance on the lens itself does

not cause the slider to move. This setting is only available if the lens is in AF mode.

Init Lens: Initializes the lens.

Figure: Lens Menu

DSMC2 GEMINI OPERATION GUIDE