User's Manual

Table Of Contents

COMPATIBLE LENSES

RED tested the following lenses and confirmed the functionality for use with the camera:

Canon EF 14 mm f/2.8L II USM Canon EF-S 17-55 f/2.8 IS USM

Canon EF 24 mm f/1.4L II USM Canon EF 24-70 f/2.8L II USM

Canon EF 35 mm f/1.4L II USM Canon EF 16-35 f/2.8L III USM

Canon EF 50 mm f/1.2L USM Canon EF 24-105 f/4L IS II USM

Canon EF 85 mm f/1.2L II USM Canon EF 70-200 mm f/2.8L IS III USM

NOTE: While RF type lenses are supported mechanically, none of the electronic capabilities are supported at this time.

For the latest information about compatible KOMODO lenses, refer to RED.com.

LENS WEIGHT AND LENS SUPPORT

Use a lens support system when mounting heavy or long lenses to your camera.

When mounting a heavy or long lens, ensure that the full weight of the lens is never directly on the camera or lens

mount. Mount the lens to the support system first, and then carefully mount the lens to the camera.

COMPATIBLE MOUNT ADAPTORS

RED tested the following adaptors and determined that they are compatible with the camera:

Canon Mount Adaptor EF-EOS R

Canon Drop-In Filter Mount Adaptor EF-EOS R with Variable ND Filter / Clear Filter / Circular Polarizer

For the latest information about compatible KOMODO lens adaptors, refer to

RED.com.

ATTACHING EF TYPE LENSES

1. Make sure that the EF-EOS R adaptor is attached to the camera.

2. Remove the mount cap from the EF-EOS R adaptor.

3. Remove the mount cap from the mount end of the lens.

4. Align the red dots and insert the EF lens in the EF-EOS R adaptor.

5. Turn the lens clockwise until it clicks in place.

6. Store the lens and adaptor caps.

REMOVING EF TYPE LENSES

NOTE: Do not remove the EF-EOS R adaptor from the camera.

1. Press and hold the lens release button on the EF-EOS R adaptor. While holding the lens release button, turn the

lens counter-clockwise until it stops and remove it from the EF-EOS R adaptor.

2. Align the red dot on the EF-EOS R Adaptor mount cap with the red dot on the EF-EOS R adaptor and insert the

adaptor cap in the adaptor.

3. Turn the adaptor cap clockwise until it clicks in place.

4. Store the EF lens with the caps attached to both ends.

KOMODO OPERATION GUIDE