Operation Guide

COPYRIGHT © 2012 RED Digital Cinema 955-0002_v3.2, Rev-A1
188 188
REMOTE
Allows the user to adjust camera settings from REDMOTE, by navigating the camera menus appearing
on the VIEWFINDER output of the camera, with summary data only appearing on the REDMOTE LCD
LOCAL
Allows the user to adjust camera settings from REDMOTE, by navigating camera menus appearing on
the REDMOTE LCD, with summary data only appearing on the VIEWFINDER output of the camera.
CUSTOMIZING LOCAL MENUS.
When operating in LOCAL mode, REDMOTE provides the user the option to configure which parameters
to display in each of the parameter status windows. You can assign the parameters to one of the 5
pages of information available under Soft Menu Buttons 4-8.
To customize parameters:
1. Ensure camera is ON and wirelessly connected to REDMOTE.
2. If Soft Menu Button 2 reports as REMOTE, press it once so it reports LOCAL.
3. Select the Soft Menu Button page you would like to set the parameter on from the right hand side of
the LCD. Refer to SOFT MENU BUTTONS 4-8.
4. Use the directional arrows on the Navigational Control to move the Red cursor to the desired
location within that page to place the parameter.
5. Now press SETUP: Soft Menu Button 3.