Operation Guide

42 42

Battery location and status are displayed in the lower UI. In this case RM B1 (Rear Module, Bay 1).

Battery location and status are also displayed on REDMOTE. In this case RM B3 (Rear Module, Bay 3).

The POWER menu also shows all installed batteries and their state of charge.

EXTERNAL DC POWER

RED DSMC Cameras accept input voltages between 11.5V - 17V D.C and can draw a maximum current

of 12 Amps.

• An appropriate 150W supply with DC output rated at 15V 10A such as AC Power Adapter P/N 740-

0019 available from RED DIGITAL CINEMA.

• RED Charger. For RED Charger you must use 2B-to-1B Power Adapter Cable P/N 790-0138.

• RED BRICK

140Wh batteries may be used with Backpack Quickplate, RED Quickplate, Battery Belt

Clip, or RED Cradle via 2B-to-1B Power Adapter Cable P/N 790-0138.

• 4-pin XLR DC power sources may be used with the camera via adaptor cable P/N 790-0164.