Operation Guide

44 44

NOTE: Once powered up, if the Power Status LED illuminates Red, it indicates low remaining

battery capacity and a battery exchange or switch over to external DC power is recommended.

POWER DOWN

The camera can be powered down in two ways:

1. Using REDMOTE or Side Handle Menu controls, or via Touch Screen LCD icons. Refer to

SECONDARY MENUS > POWER.

2. Depress and continue to hold the Power / Record button in its fully depressed position until the

INITIATING CAMERA SHUTDOWN shows on the display.

After Power Down, the Power Status LED will illuminate Red, if an appropriate power source is available.