Operation Guide

Timelapse Initiates Timelapse Record Mode

Zebra 1 Toggles Zebra 1 On / Off

Zebra 2 Toggles Zebra 2 On / Off

+ Volume 1 Increases volume of Channel 1 (when in microphone mode)

- Volume 1 Decreases volume of Channel 1 (when in microphone mode)

+ Volume 2 Increases volume of Channel 1 (when in microphone mode)

- Volume 2 Decreases volume of Channel 1 (when in microphone mode)

+ ISO Increases camera Sensitivity

- ISO Decreases camera Sensitivity

+ Shutter Increases camera Shutter Speed

- Shutter Decreases camera Shutter Speed

GPIO selects the GPIO Preferences sub-menu.

This menu permits the function of GPI A and B defined as either -

Record: starts standard mode (video and audio) record. Subsequent trigger stops record.

Pre-Record: activates Pre-record. Subsequent triggers start / stop record.

Timelapse: activates Timelapse. Subsequent trigger activates one-shot or burst recording.

Ramp: initiates variable frame rate ramp speed change.

Shut Down: initiates a controlled camera power down

Play Clip: causes the selected Clip to play back at normal speed

Next Clip: cues the selected clip to end. If at end, cues to beginning of next clip.

For GPI A the factory default is Record and for GPI B factory default is Timelapse.