Specification
Table Of Contents
- Table of Contents
- Weatherproof Boxes and Covers
- Weatherproof Covers
- Weatherproof Lampholders
- Weatherproof Fixtures
- Code Keeper® Weatherproof Covers — Overview
- Code Keeper® Weatherproof Covers
- Universal While-In-Use Covers
- Swimming Pool Junction Boxes
- Universal Boxes and Covers
- Weatherproof Covers
- Round Boxes, Extensions & Covers
- Weatherproof Lampholders
- Outdoor Lighting
- Vaportight Lighting
- Rigid/Aluminum Conduit Bodies, Gaskets & Covers
- Mogul Pulling Elbow/Service Entrance Bodies
- Service Entrance Fittings
- Zinc Concrete Slab Inserts, Elbows & Plugs
H-11
Weatherproof Fixtures
Carlon
®
Non-Metallic Weatherproof Fixtures
Twist-on/lock-on
socket assembly
Ceramic
screw shell
Universal
Mounting
Base
3
⁄
4
" threaded hubs
• Designed for indoor or outdoor use
• One-piece design with
20.25 cu. in. capacity
• Approved for dwelling
• Acceptable for barn applications
• Junction box approved
• Rated for 60°C field wiring with 150W
bulb and tempered glass globe
• Approved for through branch wiring —
accommodates eight #12 AWG through
branch circuit conductors
• UL and cUL Listed
• UL Marine Listed
Installation Instructions
1. Disassemble fixture from base.
2. Make wire terminations according to the NEC
®
or local electrical codes.
3. Fold fixture wire into fixture base.
4. Twist on socket assembly.
5. Fixture assembly is ready for lamp and globe installation.
NOTE:
•
Plastic globes mounted in a VERTICAL POSITION
(globe pointing down)
can only use a maximum lamp size of 60 watts
•
Glass globes mounted in a VERTICAL POSITION can only use a maximum
lamp size of 100 watts
•
HORIZONTAL mountings have a maximum lamp size of 60 watts
•
It is NOT RECOMMENDED to mount plastic globes horizontally
for incandescent applications
•
Carlon
®
Weatherproof Fixture Bases and Globes are SOLD SEPARATELY
Installation
• Includes gasket, four lug nuts and two mounting screws
Polyester material.
High-heat and
impact resistance
and
Weatherproof Boxes, Covers and Conduit Bodies