Product Brochure
Table Of Contents
- Table of Contents
- Weatherproof Boxes and Covers
- Weatherproof Covers
- Weatherproof Lampholders
- Weatherproof Fixtures
- Code Keeper® Weatherproof Covers — Overview
- Code Keeper® Weatherproof Covers
- Universal While-In-Use Covers
- Swimming Pool Junction Boxes
- Universal Boxes and Covers
- Weatherproof Covers
- Round Boxes, Extensions & Covers
- Weatherproof Lampholders
- Outdoor Lighting
- Vaportight Lighting
- Rigid/Aluminum Conduit Bodies, Gaskets & Covers
- Mogul Pulling Elbow/Service Entrance Bodies
- Service Entrance Fittings
- Zinc Concrete Slab Inserts, Elbows & Plugs
H-9
Weatherproof Lampholders
Carlon
®
Non-Metallic Weatherproof Lampholders
Paintable surface
PVC material
will not rust
or corrode
Secure, stay-in-place
lighting arms
Porcelain sockets —
reduces the need
for replacement
Silicone gaskets
to keep moisture out,
even in upright position
Tool and
no-tool
adjustment
• UV resistant — suitable
for outdoor use
• Accepts 150-watt
max or 300-watt
(incandescent only)
• Non-Metallic/
Noncorrosive
• UL and cUL Listed
• Approved for upward
use in wet locations
Installation Instructions:
1. Turn off electricity before starting.
2. Bring power leads into the outlet box and connect
using proper wire nuts or insulation materials.
3. Use drill or nail to knock out holes on lampholder
cover that align with outlet box. When completed,
be sure visual perimeter of weatherproof gasket
is even to ensure proper seal.
4. Floodlight lampholders can be positioned using
two different adjustments. Loosen locknut to
turn lampholder assembly to desired position.
Tighten locknut. Then depress pushbutton to
adjust lampholder to final position.
Installation
• Includes gasket, four lug nuts and two mounting screws
Available with round
or rectangular cover
and
Weatherproof Boxes, Covers and Conduit Bodies