Installation guide

86 NetIQ eDirectory 8.8 SP8 Installation Guide
 n4u.nds.flatcleaning-interval
 n4u.nds.server-state-up-thresholdn4u.nds.heartbeat-scheman4u.nds.heartbeat-
data
The following table provides a description of all the configuration parameters.
Parameter Description
n4u.nds.preferred-server
The host name of the machine that hosts the eDirectory
service.
Default = null
n4u.base.tree-name
The tree name that Account Management uses. This is
a mandatory parameter set by the Account
Management Installer. This parameter cannot be set.
n4u.base.dclient.use-udp
DClient can use UDP in addition to TCP for
communicating with the eDirectory servers. This
parameter enables the UDP transport feature.
Default = 0
Range = 0, 1
n4u.base.slp.max-wait
The Service Location Protocol (SLP) API calls timeout.
Default = 30
Range = 3 to 100
This value is in seconds.
This option is supported only by NetIQ SLP and not
OpenSLP.
n4u.nds.advertise-life-time
eDirectory reregisters itself with the Directory Agent
after this time period.
Default = 3600
Range = 1 to 65535
This value is in seconds.
n4u.server.signature-level
Determines the level of enhanced security support.
Increasing this value increases security, but decreases
performance.
Default = 1
Range = 0 to 3
n4u.nds.dir
The eDirectory directory information database.
Default:
/var/opt/novell/eDirectory/data/
This parameter cannot be set using the ndsconfig
set
command. You can manually change this
parameter if you want to relocate your DIB. However,
we do not recommend you do so.