User guide

Settings for the SOAP Digital Signature
15-15
• [Client Function]: Response Receiving setup: SOAP signature verification
Set whether to verify the SOAP digital signature when receiving a request of a SOAP message or a
response.
"No" is set by default.
• [Server Function]: Request Receiving setup: Details button
• [Client Function]: Response Receiving setup: Details button
This button is used to switch between "Details" and "Standard" view of the signature verification
setting.
The above figure shows when the Details button has been clicked. (The SOAP signature
verification ID is displayed.)
− SOAP signature verification ID
This is a detailed setting item when the signature verification is "Yes" upon receipt of a request
or a response. Select the alias of the site certificate to be used for verification of the SOAP
digital signature from the pull-down menu.
Notes
• If the verification function of the SOAP digital signature is enabled from the Web Service
Information Edit Tool, SOAP digital signatures attached to the received SOAP messages are
automatically verified based the settings.
• When exchanging a signature between the original assurance functions of the Interstage SOAP
Service, there is no need to specify the site certificate (SOAP signature verification ID) to be used
for signature verification because the certificate is attached by default.
• The settings of the SOAP digital signature verification can also be configured using the
soapsecverifyconf command. For information about the soapsecverifyconf command, refer to the
Reference Manual (Command Edition).