53-1003746-01 14 April 2015 Brocade Network Advisor Installation and Migration Guide Supporting Network Advisor 12.4.
© 2015, Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the B-wing symbol, Brocade Assurance, ADX, AnyIO, DCX, Fabric OS, FastIron, HyperEdge, ICX, MLX, MyBrocade, NetIron, OpenScript, VCS, VDX, and Vyatta are registered trademarks, and The Effortless Network and the On-Demand Data Center are trademarks of Brocade Communications Systems, Inc., in the United States and in other countries. Other brands and product names mentioned may be trademarks of others.
Contents About This Document In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . viii What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2 Network Advisor Configuration Configuring Network Advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Accessing the Network Advisor interfaces . . . . . . . . . . . . . . . . . . . . 24 Logging into a server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Launching a remote client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Clearing previous versions of the remote client . . . . . . . . . . . .26 Launching the SMC on Windows . . . . .
Migration rollback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Migration rollback due to insufficient space . . . . . . . . . . . . . . . 61 Chapter 4 Uninstallation Uninstalling from Windows systems . . . . . . . . . . . . . . . . . . . . . . . . . 63 Uninstalling from Windows systems (headless uninstall) . . . . . . . .64 Uninstalling from UNIX systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Uninstalling from UNIX systems (headless uninstall) .
vi Brocade Network Advisor Installation and Migration Guide 53-1003746-01
About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii • Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii • What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii • Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii • Notice to the reader . . . . . . . . . . . . .
Supported hardware and software In those instances in which procedures or parts of procedures documented here apply to some devices but not to others, this guide identifies exactly which devices are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for Network Advisor 12.4.0, documenting all possible configurations and scenarios is beyond the scope of this document.
TABLE 1 Fabric OS-supported hardware (Continued) Device name Terminology used in documentation Firmware level required Brocade 6505 switch 24-port, 16 Gbps Edge switch Fabric OS v7.0.1 or later Brocade M6505 embedded switch 24-port, 16 Gbps embedded switch Fabric OS v7.2.0 or later Brocade 6510 switch 48-port, 16 Gbps switch Fabric OS v7.0.0 or later Brocade 6520 switch 96-port, 16 Gbps switch Fabric OS v7.1.
TABLE 1 Fabric OS-supported hardware (Continued) Device name Terminology used in documentation Firmware level required Brocade DCX-4S with FC8-64 Blades 4-slot Backbone Chassis with 8 Gbps 64-FC port blades Fabric OS v6.4.0 or later Brocade DCX-4S with FR4-18i Blades 4-slot Backbone Chassis with 4 Gbps Router, Extension blade Fabric OS v6.2.0 or later Brocade DCX-4S with FC10-6 Blades 4-slot Backbone Chassis with FC 10 - 6 ISL Blade Fabric OS v6.2.
TABLE 1 Fabric OS-supported hardware (Continued) Device name Terminology used in documentation Firmware level required FC16-48 Blade 16 Gbps 48-port blade Fabric OS v7.0.0 or later 16 Gbps 64-port blade Fabric OS v7.3.0 or later 10 Gbps FCoE Port Router Blade Fabric OS v6.3.0 or later FR4-18i Blade 4 Gbps Router Extension blade Fabric OS v5.1.0 or later FS8-18 Encryption Blade Encryption Blade Fabric OS v6.1.1_enc or later 8 Gbps Router Extension Blade Fabric OS v6.4.
TABLE 2 IronWare-supported hardware (Continued) Device name xii Terminology used in documentation Firmware level required FastIron CX 648S-HPOE (FCX648S-HPOE) Ethernet L2/L3 Edge switch, 48 1GbE RJ45 ports, 48 POE+ ports FastIron 06.0.00 and later FastIron CX 624S-F (FCX624S-F) Ethernet L2/L3 Edge switch, 20 SFP ports FastIron 06.0.00 and later FastIron CX 624-E (FCX624-E) Ethernet L2/L3 Edge switch, 24 1GbE RJ45 ports FastIron 06.0.
TABLE 2 IronWare-supported hardware (Continued) Device name Terminology used in documentation Firmware level required ICX 6450-24-HPOE Premium router 24-port Campus LAN HPOE Premium router FastIron 07.4.00 and later ICX 6450-48 switch 48-port Campus LAN switch FastIron 07.4.00 and later ICX 6450-48 Base L3 router 48-port Campus LAN Base L3 router FastIron 07.4.00 and later ICX 6450-48 Base router 48-port Campus LAN Base router FastIron 07.4.
TABLE 2 IronWare-supported hardware (Continued) Device name xiv Terminology used in documentation Firmware level required ICX 7450-24-HPOE Base L3 router 24-port Campus LAN HPOE Base L3 router FastIron 08.0.20 and later ICX 7450-24-HPOE Base router 24-port Campus LAN HPOE Base router FastIron 08.0.20 and later ICX 7450-48 switch 48-port Campus LAN switch FastIron 08.0.20 and later ICX 7450-48 Base L3 router 48-port Campus LAN Base L3 router FastIron 08.0.
TABLE 2 IronWare-supported hardware (Continued) Device name FastIron WS devices Terminology used in documentation Firmware level required Enterprise Campus switch Motorola Controllers RFS4000 series Wireless controller Mobility 5.1 Motorola Controllers RFS6000 series Wireless controller Mobility 5.1 Motorola Controllers RFS7000 series Wireless controller Mobility 5.1 Motorola Access Point 7131 Wireless access point Mobility 4.1.1 (standalone mode) Mobility 5.
TABLE 2 IronWare-supported hardware (Continued) Device name Terminology used in documentation TurboIron 24X (T1-24X-AC) Data Center switch Firmware level required 4.1.00d or 4.2.00 or later Brocade 6650 Switch Data Center switch FastIron 7.5 and later Brocade 6650 Base L3 Router Data Center base L3 router FastIron 7.5 and later Brocade 6650 Router Data Center router FastIron 7.5 and later 1 The Management application cannot discover or manage wireless access points running Mobility 5.1.
TABLE 4 HBA-supported hardware Device name Terminology used in documentation Firmware level required Brocade 415 Host Bus Adapter 4 Gbps 1-port HBA Brocade 425 Host Bus Adapter 4 Gbps 2-port HBA Brocade 815 Host Bus Adapter 8 Gbps 1-port HBA Brocade 825 Host Bus Adapter 8 Gbps 2-port HBA Brocade 1860 Fabric Adapter 16 Gbps FC HBA mode 10 Gbps CNA mode 10 Gbps NIC mode Adapter Software 3.0.0.0 or later Brocade 1867 HBA 16 Gbps Mezzanine HBA Adapter Software 3.0.3.
Document conventions This section describes text formatting conventions and important notice formats used in this document.
Notice to the reader This document may contain references to the trademarks of the following corporations. These trademarks are the properties of their respective companies and corporations. These references are made for informational purposes only. Corporation Referenced trademarks and products Linus Torvalds Linux Microsoft Corporation Windows, Windows NT, Internet Explorer Netscape Communications Corporation Netscape Red Hat, Inc.
Getting technical help Contact your switch support supplier for hardware, firmware, and software support, including product repairs and part ordering. To expedite your call, have the following information available: 1. Management Application Serial Number To obtain the Management application serial number, select Help > License. The License dialog box displays. 2.
4. World Wide Name (WWN) Use the licenseIdShow command to display the WWN of the chassis. If you cannot use the licenseIdShow command because the switch is inoperable, you can get the WWN from the same place as the serial number, except for the Brocade DCX. For the Brocade DCX, DCX-4S, and DCX 8510-8, access the numbers on the WWN cards by removing the Brocade logo plate at the top of the nonport side of the chassis.
xxii Brocade Network Advisor Installation and Migration Guide 53-1003746-01
Chapter 1 Installation In this chapter • System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Downloading the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • Pre-installation requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 • Installing the application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 • Headless installation. .
1 System requirements Server and client operating system requirements Table 5 summarizes the required operating system (OS) for servers and the packages supported by each OS version. NOTE It is recommended that you run Network Advisor on a dedicated machine to avoid conflicts with other applications that use the same resources and ports (such as SNMP, web server, and so on). NOTE Enterprise edition (SAN or IP) and Professional Plus edition (SAN or IP) are not supported on 32-bit operating systems.
System requirements TABLE 5 Server operating system requirements (Continued) Operating system Version Linux® Guest VMs - 1. 1 Guest OS version Supported packages RedHat Enterprise 6.4 Advanced (x86 32-bit) RedHat Enterprise 6.5 Advanced (x86 32-bit) RedHat Enterprise 6.6 Advanced (32-bit) RedHat Enterprise 7.0 Advanced (x86 32-bit) SuSE Enterprise Server 11.3 (32-bit) SuSE Enterprise Server 12 (32-bit) Oracle Enterprise 6.4 (x86 32-bit) Oracle Enterprise 6.5 (x86 32-bit) Oracle Enterprise 7.
1 System requirements TABLE 6 Client operating system requirements Operating system Version Windows® - Linux® Guest VMs - 4 Guest OS version 7 Enterprise (x86 32-bit) 8 Enterprise (x86 32-bit) 8.
System requirements 1 Memory, host, and disk space requirements Memory requirements are only applicable when there are no other applications running on the Network Advisor server. Paging space should be equal to or exceed the physical memory size. NOTE To manage more than 9000 SAN ports or 200 IP devices, you must have a 16 core processor. NOTE To efficiently manage more than 9000 SAN ports or 200 IP devices, it is recommended to allocate a minimum of 2 GB client memory and 6 GB server memory.
1 System requirements Table 8 summarizes the minimum system requirements for server (plus 1 client) installation. TABLE 8 Minimum system requirements for server (plus 1 client) installation Resources Professional Edition Professional Plus or Enterprise Edition Installed Memory 4 GB (32-bit) 6 GB (64 bit) 6 GB Processor Core Count (including physical and logical cores) 2 2 Disk Space 10 GB 20 GB Table 9 summarizes the recommended system requirements for server (plus 1 client) installation.
System requirements 1 Browser requirements The launch of Network Advisor and the launch of Element Manager (Web Tools) from the application are supported from the following browsers with a Java plug-in: • Browsers - Windows Internet Explorer 11.0.9 on Windows - Firefox 24 and later on Windows or Linux - Google Chrome 33 on Windows • Java Plug-ins — For the current supported JRE version for Network Advisor and Web Tools, refer to the Release Notes. NOTE For higher performance, use a 64-bit JRE.
1 Downloading the software Downloading the software You can download the software and documentation from the MyBrocade website. 1. Go to the MyBrocade website. http://my.brocade.com/ 2. Enter your user ID and password. If you do not already have a MyBrocade account, you can create one. 3. Select MyBrocade from the Take me to list, if necessary. 4. Click LOG IN. 5. Click downloads on the main page. 6. Select Management Software from the Download by list. 7.
Pre-installation requirements 1 Pre-installation requirements Before you install Network Advisor, make sure you meet the following requirements. • Make sure all system requirements have been met prior to installation. For specific system requirements, refer to “System requirements” on page 1. If you are running Professional Plus or Enterprise edition on a 32-bit machine, you must migrate to a 64-bit machine within your current release, then you can migrate to Network Advisor 12.4.
1 Installing the application Installing the application Before you install the application, make sure your system meets the minimum pre-installation requirements (refer to “Pre-installation requirements” on page 9). If you are migrating data, refer to “Data Migration” on page 45. NOTE SAN with SMI Agent + IP Network Advisoris not supported on 32-bit Windows systems. For more information, refer to “Pre-migration requirements” on page 50.
Installing the application 1 6. Make sure the Launch Configuration check box is selected (default) on the Installation Complete screen, and click Done. NOTE If a minimum of 10 GB space is not available on your server during installation, a warning message displays and installation fails. If the localhost is not mapped to the loopback address, an error message displays.
1 Headless installation 3. Save and close the file. To configure the application, refer to one of the following sections: • If this is a fresh installation, refer to “Network Advisor Configuration” on page 17. • If you are upgrading from a previous version and need to migrate data, refer to “Data Migration” on page 45. Headless installation Headless installation, also known as silent mode installation, is fully supported on all platforms.
Headless installation 1 Performing a headless installation on Windows and UNIX systems To perform a headless installation through the CLI, download the software (refer to “Downloading the software” on page 8). • For Windows systems, complete the following steps: 1. Select Start > Programs > Accessories, right-click Command Prompt and select Run as administrator. 2. Execute this command: install.
1 Client-only installation Collecting supportsave on Windows and Linux To collect server supportsave, run the script file located at: \bin\commandsupportsave Once the script file is triggered, the server supportsave is collected at the following location: \support Client-only installation You can install a client-only application on a machine other than the server (without using a web browser) by creating a client bundle on the server, and then copying and installing that client on a
Client-only installation 1 4. Enter the IP address of the Network Advisor server in the Network Address list. NOTE The server must be the exact same version, edition, starting port number, and network size as the client. NOTE You can remove a server from the Network Address list by selecting the IP address and clicking Delete. 5. Enter your user name and password. The defaults are Administrator and password, respectively.
1 16 Client-only installation Brocade Network Advisor Installation and Migration Guide 53-1003746-01
Chapter 2 Network Advisor Configuration In this chapter • Configuring Network Advisor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Accessing the Network Advisor interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . • Performance collection for SMI-A only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Syslog troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Installing the ODBC driver . . . . . . .
2 Configuring Network Advisor 3. Select one of the following options on the Package screen and click Next. • • • • SAN with SMI Agent IP SAN with SMI Agent + IP (default) SMI Agent Only (Go to step 8.) NOTE SMI Agent is not supported in a Professional edition configuration. NOTE If you choose to install only the SMI Agent, the configuration defaults to the SAN Enterprise package.
2 Configuring Network Advisor 6. Complete the following steps on the FTP/SCP/SFTP Server screen. a. Choose one of the following options: • Select Built-in FTP/SCP/SFTP Server (default) to configure an internal FTP/SCP/SFTP server and select one of the following options: - Select Built-in FTP Server to configure an internal FTP server This is the default option. The internal FTP server uses a default account and port 21. You can configure your own account from the Options dialog box.
2 Configuring Network Advisor 8. Complete the following steps on the Server IP Configuration screen.
2 Configuring Network Advisor b. Select an address from the Switch - Server IP Configuration Preferred Address list. • Select Any from the Switch - Server IP Configuration Preferred Address list to enable switch and server communication with one of the reachable IP address present in the server. By default, Any option is selected. or • Select an IP address from the Switch - Server IP Configuration Preferred Address list. The preferred IP address is used for switch and server communication.
2 Configuring Network Advisor e. Enter a port number in the Syslog Port Number field (default is 514). NOTE If the default syslog port number is already in use, you will not receive any syslog messages from the device. To find and stop the process currently running on the default Syslog port number, refer to “Syslog troubleshooting” on page 31. f. Enter a port number in the SNMP Port Number field (default is 162). g. Enter a port number in the TFTP Port Number field (default is 69). h.
Configuring Network Advisor 2 11. (SAN Enterprise or SMI Agent) Select one of the following options on the SAN Network Size screen and click Next: NOTE Port count is equal to the total number of switch ports across all fabrics. NOTE SAN with SMI Agent + IP edition is not supported on a 32-bit Windows system.
2 Accessing the Network Advisor interfaces c. Select the Start Client check box, if necessary. Only displays if you selected SAN with SMI Agent + IP or SAN with SMI Agent on the Package screen. d. Click Finish. After all of the services are started, the Log In dialog box displays. To make changes to the configuration, you can re-launch the configuration wizard (refer to “Configuring an explicit server IP address” on page 40). 16. Enter your user name and password.
Accessing the Network Advisor interfaces 2 3. Enter your user name and password. The defaults are Administrator and password, respectively. NOTE Do not enter Domain\User_Name in the User ID field for LDAP server authentication. 4. Select or clear the Save password check box to choose whether you want the application to remember your password the next time you log in. 5. Click Login. 6. Click OK on the Login Banner dialog box. The Network Advisor application displays.
2 Accessing the Network Advisor interfaces 4. Log into another server by entering the IP address to the other server in the Network Address field. NOTE The server must be the exact same version, edition, starting port number, and network size as the client. NOTE You can remove a server from the Network Address list by selected the IP address and clicking Delete. 5. Enter your user name and password. The defaults are Administrator and password, respectively.
Accessing the Network Advisor interfaces 2 Launching the SMC on Windows Open the Server Management Console from the Start menu on the Network Advisor server. You can also drag the SMC icon onto your desktop as a short cut. Launching the SMC on Linux NOTE The Server Management Console is a graphical user interface and should be launched from the XConsole on Linux systems. Double-click the SMC icon on your desktop. OR 1.
2 Accessing the Network Advisor interfaces Launching the SMIA Configuration Tool remote client The remote client link in the Start menu does not automatically upgrade when you upgrade the Management application. You must clear the previous version from the Java cache. To clear the previous version, refer to “Clearing previous versions of the remote client” on page 26. The remote client requires Oracle JRE. For the current supported JRE version for Network Advisor, refer to the Release Notes.
2 Performance collection for SMI-A only Performance collection for SMI-A only For SMI-A only installations, you can use the following procedures to configure performance collection using scripts. Enabling or disabling performance statistics collection To enable or disable performance statistics collection, complete the following steps. • On Windows systems, complete the following steps. a. Open a command prompt and navigate to the Install_Home\utilities directory. b.
2 Performance collection for SMI-A only Exporting configuration data To export configuration data from the CFG_backup_archive table, complete the following steps. • On Windows systems, complete the following steps. a. Open a command prompt and navigate to the Install_Home\utilities directory. b. Export configuration data by typing exportconfigdata.bat dbusername dbpassword and pressing Enter. For example, exportconfigdata.bat dcmadmin passw0rd. • On UNIX systems, complete the following steps. a.
Syslog troubleshooting 2 Syslog troubleshooting If the default syslog port number is already in use, you will not receive any syslog messages from the device. Use one of the following procedures (depending on your operating system), to determine which process is running on the syslog port and to stop the process. Finding the process 1. Open a command window. 2. Choose one of the following options: • On Linux systems, type netstat –nap | grep 514 and press Enter. The process running on port 514 displays.
2 Installing the ODBC driver Installing the ODBC driver You must have the Open Database Connectivity (ODBC) driver to allow remote clients to export data and generate reports. The ODBC driver enables you to configure the data source name (DSN) for the Network Advisor database. Installing the ODBC driver on Windows systems You must have the Open Database Connectivity (ODBC) driver to allow remote clients to export data and generate reports.
Installing the ODBC driver 2 11. Enter the IP address or host name of the Network Advisor server in the Server field. 12. Enter the database server port number in the Port Number field. 13. Enter the database user name in the User Name field. 14. Enter the password in the Password field. 15. Click Test to test the connection. NOTE You can also use the Windows ODBC Driver Manager to add the DSN for the Linux database server. 16. Click OK on the Connection Test dialog box. 17. Click Save. 18.
2 Installing the ODBC driver Adding the datasource on Linux systems Before you edit the INI files, install Network Advisor (refer to “Installation” on page 1) and make sure the PostgreSQL database is up and running. NOTE For RedHat and Oracle Enterprise systems, the odbc.ini and odbcinst.ini files are located in /etc. For SUSE systems, the odbc.ini and odbcinst.ini files are located in /etc/unixODBC. 1. Open the odbc.
2 Installing the ODBC driver 5. On the Set up user authentication screen, complete the following steps. a. Enter the database user name in the User name field. b. Select the Password required check box. c. Click Test Connection to test the connection. The Authentication Password dialog box displays. d. Enter the database password in the Password field and click OK. e. Click OK on the Connection Test dialog box.
2 Smart Card driver installation Smart Card driver installation Windows operating systems do not require smart card drivers to be installed separately; the driver is bundled with the operating system. However, you must install a smart card driver for the Linux operating systems. You must install both the special USB Chip/Smart Card Interface Device (USB CCID) and the PC/SC IFD driver. You can download the source code and compile it from one of the following websites: • USB CCID (ccid-1.3.7.tar.
Smart Card driver installation 2 5. Create a soft link into the system directory. This is to support the automatic restart of the pcscd daemon upon system restart. If you installed the pcsc directory into the /opt directory, just create the soft link. Otherwise, use the name of the new directory in place of /opt. S.u.s.e> ln –s /opt/pcsc/pcscctl /etc/init.d/pcscd S.u.s.e> chkconfig --add pcscd or redhat> ln –s /opt/pcsc/pcscctl /etc/init.
2 Smart Card driver installation Installing the Smart Card driver on the remote client 1. Complete steps 1 through 4 in “Installing the Smart Card driver on the local client” on page 36. 2. Run the following commands to support remote clients (Web Start). > cd /usr/lib > ln –s /opt/pcsc/lib/libpcsclite.so . NOTE If a soft link exists on libpcsclite.so, make sure that the final file is linked to /opt/pcsc/lib/libpcsclite.so.xxx. It is recommended that you back up the original.
2 Smart Card driver installation 3. If there is an existing pcscd script in this directory, you can move and rename this file before you overwrite it. > mv /etc/init.d/pcscd /etc/init.d/pcscd.org 4. Create a soft link using the following command. > ln –s /opt/pcsc/pcscctl /etc/init.d/pcscd The existing pcscd.org script in this directory implies that a different driver version exists. You can compare the existing one with the one under /opt/pcsc/pcscd/sbin.
2 Configuring an explicit server IP address Configuring an explicit server IP address If you selected a specific IP address from the Server IP Configuration screen during installation and the selected IP address changes, you will not be able to connect to the server. To connect to the new IP address, you must manually update the IP address information. To change the IP address, complete the following steps. 1.
Product improvement 2 11. Enter your user name and password and click Login. The defaults are Administrator and password, respectively. NOTE Do not enter Domain\User_Name in the User ID field for LDAP server authentication. 12. Click OK on the Login Banner. Product improvement To improve its products, Brocade is collecting usage statistics from the field. If you agree to participate in the program, the Network Advisor server will transmit data back to the secure Brocade web server (HTTPS).
2 Product improvement Disabling product improvement data transfer You can disable feature usage data transfer from the Options dialog box once your system is up and running. To disable feature usage data transfer from the application, complete the following steps. 1. Select Server > Options. The Options dialog box displays. 2. Select Product Improvement in the Category list. 3. Select the No, thank you option. 4. Click OK to save your selection and close the Options dialog box.
2 Configuring remote client access to the database 11. When the file is successfully created, the client changes the state of the data transfer to “Uploading” and transmits the data. The client transmits the data securely to the Brocade web server using the Apache HTTP Components third-party library. The client communicates with the Brocade web server using an authorization token. 12.
2 44 Configuring remote client access to the database Brocade Network Advisor Installation and Migration Guide 53-1003746-01
Chapter 3 Data Migration In this chapter • Upgrading the license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Supported migration paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Pre-migration requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Migrating data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Cross flavor migration . . . .
3 Upgrading the license TABLE 12 IP upgrade paths Current software release To software release IP Base Trial IP Base Licensed version SAN + IP Professional Plus Licensed version SAN + IP Enterprise Licensed version IP Base Licensed version (lower count) IP Base Licensed version (higher count) SAN + IP Enterprise Licensed version TABLE 13 SAN + IP upgrade paths Current software release To software release SAN + IP Professional SAN + IP Professional Plus Licensed version SAN + IP Enterprise Tria
Supported migration paths 3 Supported migration paths NOTE Enterprise and Professional Plus editions are not supported on 32-bit servers. To migrate Enterprise and Professional Plus editions to a 64-bit server, refer to “Pre-migration requirements when migrating from one server to another” on page 50. Direct migration is not supported on pre-12.2.X releases. Table 14 shows the migration paths from DCFM and INM. Table 15 shows the migration paths from Network Advisor 12.1.X or earlier releases.
3 Supported migration paths TABLE 15 Pre-12.1.X release migration path (Continued) Network Advisor 12.4.0 Network Advisor 11.3.x Network Advisor 11.3.X > Network Advisor 12.0.X > network Advisor 12.1.X > Network Advisor 12.3.X Network Advisor 12.4.0 Network Advisor 12.0.x Network Advisor 12.0.X > Network Advisor 12.1.x > Network Advisor 12.3.X Network Advisor 12.4.0 Network Advisor 12.1.x Network Advisor 12.0.X > Network Advisor 12.1.x > Network Advisor 12.3.X Network Advisor 12.4.
3 Supported migration paths TABLE 16 Network Advisor version migration paths (Continued) Current version Professional version Trial Version Licensed Version Enterprise Professional Plus Enterprise Network Advisor 12.4.0 Enterprise Trial No Yes1 No Yes1 Network Advisor 12.4.0 Enterprise Licensed No No No Yes1 1. Local path migration is only supported when you partially uninstall the current version.
3 Pre-migration requirements EFCM and Fabric Manager migration paths You cannot migrate directly from EFCM or Fabric Manager to Network Advisor 12.4.0. To migrate from EFCM or Fabric Manager, you must first migrate to DCFM 10.3.X, then migrate to Network Advisor 11.1.X, then migrate to Network Advisor 12.0.X, then migrate to Network Advisor 12.2.X, and then migrate to Network Advisor 12.4.0. For more information about migrating from EFCM or Fabric Manager to DCFM 10.3.
3 Pre-migration requirements If you are migrating from a pre-12.2.X release on a 32-bit Windows server to Network Advisor 12.4.0 on a 64-bit Windows server, complete the following steps. 1. Install and migrate to Network Advisor 12.2.X, 12.3.X, or 12.4.X in the same machine (refer to “Supported migration paths” on page 47). 2. Back up the server using Options > Server Backup on the 32-bit Windows server. 3. Install the same version (12.2.X, 12.3.X, or 12.4.X) on the 64-bit Windows server. 4.
3 Pre-migration requirements If you are migrating from a pre-12.2.X release on a 32-bit Linux server to Network Advisor 12.4.0 on a 64-bit Linux server (32-bit compatible), complete the following steps. 1. Install and migrate to Network Advisor 12.2.X, 12.3.X, or 12.4.X on the 32-bit Linux server (refer to “Supported migration paths” on page 47). 2. Back up the server using Options > Server Backup on the 32-bit Linux server. 3. Install Network Advisor 12.2.X, 12.3.X, or 12.4.
Pre-migration requirements 3 If you are migrating from a Linux server that is no longer supported to a supported Linux server, complete the following steps. For a list of supported operating system servers, refer to Table 5 on page 2. NOTE If you are migrating from a pre-12.0.X release, you must first migrate to Network Advisor 12.0.X on your current server (refer to Table 14 on page 47 for the release migration path). 1. Install Network Advisor 12.2.
3 Migrating data • Make sure that the DISPLAY environment variable is correctly defined in the shell with a valid value (for example, to display to the local console, export DISPLAY=:0.0, or to display to a remote system that has an X Server running, export DISPLAY=Remote_IP_Address:0.0). You may also need to consider a firewall that might block the display to the X Server which listens by default on TCP port 6000 on the remote host.
3 Migrating data 2. Choose one of the following options: • If data is detected on your system, the Copy Data and Settings from previous releases screen displays. To migrate data from the previous version installed (automatically detected), select Yes, from the following location. Continue with step 3. • If data is not detected, the Copy Data and Settings from previous releases screen displays. Complete the following steps: a.
3 Migrating data 5. Select one of the following options on the Installation Type screen and click Next. NOTE The DCX and DCX 8510-8 Backbone chassis require Enterprise edition. • Network Advisor - Licensed version Continue with step 6. Requires you to enter a license key during configuration to enable features and configuration. • Network Advisor - 120 days Trial Go to step 7. Enables you to manage IP, SAN, or SAN and IP networks from a single interface for 120 days.
3 Migrating data b. Click Next. If port 21 or 22 is busy, a message displays. Click OK to close the message and continue. Once the Management application is configured make sure port 21 or 22 is free and restart the Server to start the FTP/SCP/SFTP service. NOTE If you use an FTP/SCP/SFTP Server which is not configured on the same machine as the Management application, the Firmware Repository feature will not be available. 8. Complete the following steps on the Server IP Configuration screen.
3 Migrating data b. Select an address from the Switch - Server IP Configuration Preferred Address list. NOTE If the “hostname” contains invalid characters, the host name does not display in the list. Valid characters include alphanumeric and dash (-) characters. The IP address is selected by default. If DNS is not configured for your network, do not select the ‘hostname’ option from either the Server IP Configuration or Switch - Server IP Configuration Preferred Address list.
3 Migrating data d. Enter a port number in the Starting Port # field (default is 24600). NOTE For Professional software, the server requires 11 consecutive free ports beginning with the starting port number. NOTE For Trial and Licensed software, the server requires 11 consecutive free ports beginning with the starting port number. e. Enter a port number in the Syslog Port # field (default is 514).
3 Migrating data 11. (SAN Enterprise or SMI Agent) Select one of the following options on the SAN Network Size screen and click Next: NOTE Port count is equal to the total number of switch ports across all fabrics. • Small (managing up to 2000 switch ports, 1-20 domains) • Medium (managing up to 5000 switch ports, 21-60 domains) • Large (managing up to 15000 switch ports, 61-120 domains) If you are configuring IP Enterprise, continue with step 12; otherwise, go to step 13. 12.
Cross flavor migration 3 Cross flavor migration To migrate from Brocade Network Advisor 12.2.X to a non-Brocade Network Advisor 12.4.0, complete the following steps. 1. Install Brocade Network Advisor 12.2.X (refer to “Installing the application” on page 10). 2. Install non-Brocade Network Advisor 12.4.0 (refer to “Installing the application” on page 10). 3. Migrate the supported (partial or full) data from Brocade Network Advisor 12.2.
3 Migration rollback For Linux Install_Home>bin>sh dbsvc start Install_Home>bin>sh service dcmsvc start For Linux, if SLP is enabled Install_Home>bin>sh slpsvc start For Linux, if CIMOM is enabled Install_Home>bin>sh service cimomsvc start 62 Brocade Network Advisor Installation and Migration Guide 53-1003746-01
Chapter 4 Uninstallation In this chapter • Uninstalling from Windows systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Uninstalling from Windows systems (headless uninstall). . . . . . . . . . . . . . . • Uninstalling from UNIX systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Uninstalling from UNIX systems (headless uninstall) . . . . . . . . . . . . . . . . . .
4 Uninstalling from Windows systems (headless uninstall) Uninstalling from Windows systems (headless uninstall) If the application was installed using the headless installation, complete the following steps to uninstall Network Advisor and SMI Agent from your Windows server. 1. Open a command prompt. 2.
4 Uninstalling from UNIX systems (headless uninstall) Uninstalling from UNIX systems (headless uninstall) If the application was installed using the headless installation, complete the following steps to uninstall Network Advisor and SMI Agent from your UNIX server. 1. Go to Install_Home/Uninstall_Network_Advisor12_4_0. 2.
4 66 Uninstalling from UNIX systems (headless uninstall) Brocade Network Advisor Installation and Migration Guide 53-1003746-01
Appendix A References In this appendix • Network Advisor packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Scalability limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Edition feature support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Management server and client ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Scalability limits Scalability limits Table 19 summarizes the scalability limits supported for Network Advisor by edition.
A Edition feature support Edition feature support Table 20 details whether the features are supported in the Professional, Professional Plus, or Enterprise versions, or only through the Element Manager of the device.
A Edition feature support TABLE 20 SAN features supported (Continued) Feature Professional Professional Plus Enterprise Layer 2 FC support Yes Yes Yes Encryption configuration and monitoring Yes Yes Yes Access Gateway – Cisco interop support Yes Yes Yes Device decommissioning Yes Yes Yes End device connectivity Collection Views Yes Yes Yes Fabric binding No Yes Yes Hardware Element Manager Element Manager Element Manager Ports Element Manager Element Manager Element Ma
A Edition feature support TABLE 20 SAN features supported (Continued) Feature Professional Professional Plus Cascaded FICON configuration wizard No No Yes Cascaded FICON Fabric merge wizard No No Yes Element Manager Element Manager Yes Firmware download Yes Yes Yes Capture SupportSave Yes Yes Yes Flow Vision No Yes Yes Frame monitor No Yes Yes HBA management Yes Yes Yes VM management Yes Yes Yes Driver/DIOS management No Yes Yes Fabric assigned WWN No Yes Yes
A Edition feature support TABLE 20 SAN features supported (Continued) Feature Professional Professional Plus Enterprise Real Time Performance collection, display, and reports Yes Yes Yes Historical Performance collection, display, and reports No Yes Yes Thresholds No Yes Yes Top talkers - Supported on SAN switches and Access Gateway No Yes Yes Marching ants No Yes Yes Data aging No Yes Yes End-to-End monitors No Yes Yes Yes Yes Yes Element Manager Element Manager Ele
A Edition feature support TABLE 20 SAN features supported (Continued) Feature Professional Professional Plus Enterprise SMI Agent Server Profile Fabric Profile Indication Sub Profile Zone Control Sub Profile Enhanced Zoning and Enhanced Zoning Control Sub Profile FDMI (Fabric Device Management Interface) Sub Profile Fabrics Virtual Fabrics Sub Profile Topology View Sub Profile FC HBA (Fibre Channel Host Bus Adapter) Profile Fan, Power Supply, and Sensor Profiles Inter Fabric Routing (FCR) Profile Tr
A Edition feature support TABLE 20 SAN features supported (Continued) Feature Professional Professional Plus Enterprise Discovery Yes Yes Yes Configuration No Yes Yes VLAN management Yes Yes Yes VM Plugin Support No Yes Yes Web Element Manager Yes Yes Yes Member selection Yes Yes Yes Zone editing Yes Yes Yes Live fabric library scope Yes Yes Yes QoS support Yes Yes Yes Zone alias support Yes Yes Yes Delete Zone database No Yes Yes Impact analysis Yes Yes
A Edition feature support TABLE 21 IP features supported (Continued) Feature Professional Base Licensed version Base with Licensed Ethernet Fabrics Base with Unlicensed Ethernet Fabrics Change management Partial support Yes Yes Yes CLI configuration management No Yes Yes Yes CLI Element Manager Yes Yes Yes Yes Configuration snapshot No Yes Yes Yes Configuration repository management Yes Yes Yes Yes Manual backup Yes Yes Yes Yes Yes Yes Yes Yes Save configuration fo
A Edition feature support TABLE 21 IP features supported (Continued) Feature Professional Base Licensed version Base with Licensed Ethernet Fabrics Base with Unlicensed Ethernet Fabrics Admin Element Manager Element Manager Element Manager Element Manager Router Admin Element Manager Element Manager Element Manager Element Manager Name Server Element Manager Element Manager Element Manager Element Manager Show switch events Yes Yes Yes Yes Syslog registration and forwarding Yes
A Edition feature support TABLE 21 IP features supported (Continued) Feature Professional Base Licensed version Base with Licensed Ethernet Fabrics Base with Unlicensed Ethernet Fabrics VLL monitor No Yes Yes Yes VPLS manager No Yes Yes Yes VPLS monitor No Yes Yes Yes Real Time Performance collection, display, and reports Yes Yes Yes Yes Historical Performance collection, display, and reports No Yes Yes Yes Thresholds No Yes Yes Yes Data aging No Yes Yes Yes sFlow
A Edition feature support TABLE 21 IP features supported (Continued) Feature Professional Base Licensed version Base with Licensed Ethernet Fabrics Base with Unlicensed Ethernet Fabrics VIP Server management No Yes Yes Yes VLAN management Yes Yes Yes Yes VM Plugin Support No Yes Yes Yes Web Element Manager Yes Yes Yes Yes Web Tools/Fabric Watch Yes Yes Yes Yes Member selection Yes Yes Yes Yes Zone editing Yes Yes Yes Yes Live fabric library scope Yes Yes Yes Y
Management server and client ports A Management server and client ports The Management application has two parts: the Server and the Client. The Server is installed on one machine and stores device-related information; it does not have a user interface. To view information through a user interface, you must log in to the Server through a Client. The Server and Clients may reside on the same machine, or on separate machines.
A Management server and client ports TABLE 22 Port usage and firewall requirements (Continued) Port Number Ports Transport Description Communication Path Open in Firewall 492 TACACS+ Authentication port TCP TACACS+ server port for authentication if you use TACACS+ as an external authentication Server–TACACS+ Server Yes 69 TFTP UDP File upload/download to product Product-Server Yes 802 Management application HTTP server TCP Non-SSL HTTP/1.
Management server and client ports TABLE 22 A Port usage and firewall requirements (Continued) Port Number Ports Transport Description Communication Path Open in Firewall 6362 LDAP Authentication SSL port TCP LDAP server port for authentication if you use LDAP as an external authentication and SSL is enabled Server–LDAP Server Yes 18122 RADIUS Authentication Server Port UDP RADIUS server port for authentication if you use RADIUS as an external authentication Server–RADIUS Server Yes 181
A Management server and client ports TABLE 22 Port usage and firewall requirements (Continued) Port Number Ports Transport Description Communication Path Open in Firewall 246082 Reserved for future use TCP Not used Client - Server No 2 Reserved for future use TCP Not used Client - Server No 246102 Reserved for future use TCP Not used Client - Server No 34568 HCM Agent discovery port TCP Used for HBA management via JSON Server - Managed Host Yes 555561 Launch in Context (LIC
