MSDS

3
Other: Referral to a physician is recommended if there is any question about the seriousness of
the exposure.
TERIAL SAFETY
7DATA SHEET
Stability and Reactivity:
Stability: Stable at normal temperatures.
Hazardous Polymerization:Will not occur at normal temperatures.
Incompatibility: Strong acids and oxidizing agents.
Decomposition Products: Thermal decomposition can yield COx, NOx, water and carbon.
Conditions to Avoid: Avoid elevated temperatures which may shorten the shelf-life of this
product. Avoid open flame.
Fire and Explosion Hazard Information:
Flash point: 127° F
Flammable Limits in air: Lower: 2.1; Upper: 12.5
Extinguishing Media: CO2, Dry Chemical and Foam.
Special Fire Fighting Procedures: Keep personnel removed and upwind from fire. Use self-
contained breathing apparatus and full protective equipment.
Unusual Fire and Explosion Hazards: Vapors are heavier than air and may travel to ignition
sources and flash back.
Hazardous products of combustion: Carbon monoxide, carbon dioxide, trace amount of sulfur
compounds and smoke.
Regulatory Information:
Hazard Communication: This MSDS has been prepared in accordance with the federal OSHA
Hazard Communication Standard 29 CFR 1910.1200.
HMIS Codes: Health 2, Flammability 2, Reactivity 2, PPE B
DOT Shipping Name: Consumer commodity, ORM-D
IMO/IMDG: UN3108, Type E, ORGANIC PEROXIDE
TSCA Inventory Status: Chemical components are listed on TSCA inventory or exempt as
impurities.
SARA Title III, Section 313: This product contains Vinyl Toluene Monomer which is subject to
reporting under Section 313 or SARA Title III (40 CFR Part 372).
EPA Waste Code(s): D001
Waste Disposal Methods: Consult with regulatory agencies of your corporate personnel for
disposal methods that comply with local, state and federal safety, health and environmental
regulations.
Notes: In normal use, the Vinyl Toluene in this product is polymerized during cure. For purposes
of air quality regulations, the maximum amount of VOC (i.e. Vinyl Toluene) emitted is