Technical Specifications

I Optimized for use in hollow-core, pre-cast

plank and post-tension slabs

I Lip keeps anchor flush during installation

I Shallow drilling—fast installation

I Shoulder prevents over drilling

I Less likely to hit reinforcing steel or post-tension

cable in concrete

I No lost time or energy drilling farther than necessary

I Anchor is set at a specified depth, does not drop too

far into hole

CONCRETE ANCHORING SPECIALISTS

RX Drop-In Anchors

Ideal for Hollow-Core, Pre-Cast Plank and

Post Tension Slabs

For more information on these and other products visit www.it wredhead.com

PAGE 1
CONCRETE ANCHORING SPECIALISTS RX Drop-In Anchors Ideal for Hollow-Core, Pre-Cast Plank and Post Tension Slabs I Optimized for use in hollow-core, pre-cast plank and post-tension slabs I Lip keeps anchor flush during installation I Shallow drilling—fast installation TM I Shoulder prevents over drilling I Less likely to hit reinforcing steel or post-tension cable in concrete I No lost time or energy drilling farther than necessary I Anchor is set at a specified depth, does not drop too far into hole
PAGE 2
Red Head makes installation simple, accurate and reliable. Drill It. Set It. Use It. Simply drill the hole to the same diameter as the outside diameter of the anchor being used. After drilling, clean the hole. Drive the anchor flush with the surface of the concrete. Expand the anchor using the setting tool provided in each master carton. The anchor is fully expanded when the shoulder of the setting tool is flush with the top of the anchor. The Red Head anchor is now set.