SDS

ManualsBrandsRed Head ManualsAnchoring Adhesives & AccessoriesA7 5 fl. oz. Adhesive Kit

MATERIAL SAFETY DATA SHEET

1. Product and Company Identification

Material name

Epcon Acrylic 7

Version #

Revision date

06-09-2010

Product Code

Product use

Concrete anchoring adhesive.

Manufacturer/Supplier

ITW Red Head

2171 Executive Drive, Suite 100

Addison, IL 60101 US

Telephone Number: (630) 350-0370

Contact Person: Andrew Rourke

Emergency

CHEMTREC: (800) 424-9300

2. Hazards Identification

Physical state

Liquid.

Appearance

Paste.

Emergency overview

DANGER!

Highly flammable. Will be easily ignited by heat, spark or flames.

Contains an organic peroxide and strong oxidizer. Contact with other materials may cause fire.

Heat may cause containers to explode.

Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact. May cause

central nervous system effects. Prolonged exposure may cause chronic effects.

OSHA regulatory status

This product is considered hazardous under 29 CFR 1910.1200 (Hazard Communication).

Potential health effects

Routes of exposure

Inhalation. Ingestion. Skin contact. Eye contact.

Eyes

Irritating to eyes. Contact may cause irritation, redness, tearing, blurred vision and/or burns.

Skin

Irritating to skin. May cause sensitization by skin contact. Contact may cause irritation, redness

and/or drying.

Inhalation

Vapors may irritate throat and respiratory system and cause coughing. May cause central nervous

system effects.

Ingestion

Irritating to mouth, throat, and stomach. Ingestion may cause vomiting, nausea, diarrhea or other

systemic effects.

Target organs

Eyes. Skin. Respiratory system. Central nervous system. Heart and cardiovascular system. Liver.

Kidneys. Reproductive system.

Chronic effects

Methyl methacrylate vapor has hypotensive properties which may cause cardiac arrest and other

cardiovascular effects. Possible reproductive hazard that may cause adverse reproductive effects

based on animal data. May cause damage to the liver and kidneys. Frequent or prolonged contact

may defat and dry the skin, leading to discomfort and dermatitis.

Potential environmental effects

The product contains a substance which is harmful to aquatic organisms.

Components CAS # Percent

3. Composition / Information on Ingredients

80-62-6 10 - 90Methyl methacrylate

94-36-0 0.1 - 10Benzoyl peroxide

84-74-2 0.1 - 5Dibutyl phthalate

Composition comments

All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in

percent by volume.

Epcon Acrylic 7

4267 Version #: 01 Revision date: 06-09-2010 Print date: 06-09-2010

CPH MSDS NA

1 / 8

Summary of content (8 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 1. Product and Company Identification Material name Epcon Acrylic 7 Version # 01 Revision date 06-09-2010 Product Code A7 Product use Concrete anchoring adhesive. Manufacturer/Supplier ITW Red Head 2171 Executive Drive, Suite 100 Addison, IL 60101 US Telephone Number: (630) 350-0370 Contact Person: Andrew Rourke Emergency CHEMTREC: (800) 424-9300 2. Hazards Identification Physical state Liquid. Appearance Paste. Emergency overview DANGER! Highly flammable.
PAGE 2
4. First Aid Measures First aid procedures Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention. Skin contact Immediately flush with plenty of water for at least 15 minutes. If skin rash or an allergic skin reaction develops, get medical attention. Wash contaminated clothing before reuse. Destroy or thoroughly clean contaminated shoes. Inhalation Move to fresh air.
PAGE 3
Methods for cleaning up Keep combustibles (wood, paper, oil, etc.) away from spilled material. Small Spills: Absorb spill with vermiculite or other inert material, then place in a container for chemical waste. Clean surface thoroughly to remove residual contamination. Large Spills: Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. This material and its container must be disposed of as hazardous waste.
PAGE 4
Canada - Quebec Components Type Value Benzoyl peroxide (94-36-0) Dibutyl phthalate (84-74-2) Methyl methacrylate (80-62-6) TWA TWA TWA 5 mg/m3 5 mg/m3 50 ppm 205 mg/m3 Type Value TWA STEL TWA STEL 5 mg/m3 10 mg/m3 5 mg/m3 125 ppm 510 mg/m3 410 mg/m3 100 ppm Mexico Components Benzoyl peroxide (94-36-0) Dibutyl phthalate (84-74-2) Methyl methacrylate (80-62-6) TWA Engineering controls Personal protective equipment Eye / face protection Use explosion-proof ventilation equipment.
PAGE 5
Conditions to avoid Heat, flames and sparks. Incompatible materials Strong oxidizing agents. Reducing agents. Strong acids. Combustible material. Polymerization initiators. Hazardous decomposition products Thermal decomposition of this product can generate carbon monoxide and carbon dioxide. Possibility of hazardous reactions Will not occur at normal temperatures, however, exposure to elevated temperatures may cause hazardous polymerization. 11.
PAGE 6
Persistence and degradability Not available. Bioaccumulation / Accumulation No data available. Partition coefficient (n-octanol/water) Not available. Mobility in environmental media No data available. 13. Disposal Considerations Waste codes D001: Waste Flammable material with a flash point <140 °F Disposal instructions Dispose of contents/container in accordance with local/regional/national/international regulations. This material and its container must be disposed of as hazardous waste.
PAGE 7
IATA IMDG 15. Regulatory Information US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List. US EPCRA (SARA Title III) Section 313 - Toxic Chemical: De minimis concentration Benzoyl peroxide (CAS 94-36-0) 1.0 % Dibutyl phthalate (CAS 84-74-2) 1.0 % Methyl methacrylate (CAS 80-62-6) 1.
PAGE 8
Country(s) or region Europe Inventory name European Inventory of Existing Commercial Chemical Substances (EINECS) On inventory (yes/no)* Yes Europe European List of Notified Chemical Substances (ELINCS) Japan Inventory of Existing and New Chemical Substances (ENCS) Yes Korea Existing Chemicals List (ECL) Yes New Zealand New Zealand Inventory Yes Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) Yes United States & Puerto Rico Toxic Substances Control Act (TSCA)