Product Manual

SAFETY WARNINGS
BEFORE OPERATING OR INSTALLING
THIS PUMP, READ THIS MANUAL AND
FOLLOW ALL SAFETY RULES AND
OPERATING INSTRUCTIONS.






voltage
change
device
terminal
board
#1
#2 - 115V
#3 - 230 V
In #2, the motor's switch is set for 115V.
The black voltage change device is
pressed down onto both terminals with the
white arrow point on the voltage change
device pointing directly to the 115V arrow
point on the terminal board.
In #1, the motor's switch is shown before
the black voltage change device is pressed
down onto the voltage terminals.
In #3, the motor's switch is set for 230V.
The black voltage change device is
pressed down onto only one terminal
with the white arrow point on the voltage
change device pointing directly to the
230V arrow point on the terminal board.
NOTE: DO NOT move white lead wires on L1 & L2.
VOLTAGE WIRING INSTRUCTIONS
Self Priming Shallow Well
Jet Pumps
IMPORTANT: READ THIS MANUAL BEFORE INSTALLING
OR OPERATING THE PUMP.
SAFETY CAREFULLY READ THESE SAFETY MESSAGES.
CAUTION
Review instructions before operating.
WARNING - ELECTRICAL PRECAUTIONS
All wiring, electrical connections, and system grounding must comply
with the National Electrical Code (NEC) and with any local codes and
ordinances. Employ a licensed electrician.
FOR DUAL VOLTAGE MOTORS:
Voltage change instructions are located on motor label or on wiring
access cover.
WARNING - RISK OF ELECTRICAL SHOCK
• Haveanelectricianprovideelectricalpowertomotor.
• Agroundfaultinterrupter(GFI)protectedcircuitisrecommended
for use with any electrical device operating near water.
• ForrecommendedcablesizeseeTable1.
• Motormustbegroundedandterminalcoverinplacetoreduce
electricalshockhazard.
• Keepmotoroperatingareaasdryaspossible.
• Alwaysdisconnectpowerbeforeservicing.
• Notinvestigatedforuseinswimmingpoolareas.