User guide

RED 4K BROADCAST MODULE OPERATION GUIDE

955-0072, REV-D | 22

4K Broadcast Module

sPecIFIcatIoN descrIPtIoN

Weight 1.606 lb (728.5 g)

Dimensions Height: 4.29" (109 mm)

Width: 5.43" (138 mm)

Depth: 2.24" (56.8 mm)

Additional Mounting 5x 1/4-20 mounting points on top

Construction Machined, Tooled (Early models are machined)

Material Aluminum

Coating Black powder coat

Operating Temperature 0°C to 40°C (32°F to 104°F)

Storage Temperature –5°C to 60°C (–20°F to 140°F)

Operating Humidity Range 0% to 85%, non-condensing

Storage Humidity Range 0% to 85%, non-condensing

Broadcast Output Format 3840 × 2160p (4K UHD), up to 59.94 FPS

Broadcast Output Frame Rates 23.98p, 24p, 25p, 29.97p, 50p, 59.94p

Recording Format (Video) Currently selected resolution settings, up to 6K up to 59.94 FPS

Audio Out N/A. Module does not currently support audio through SDI

SMPTE Timecode Time Code (TC)

3G/HD-SDI Output 4x BNC (rated for 3G-SDI)

4x uncompressed 1920 × 1080p Level-A YCbCr 4:2:2 10-bit video (Rec 709)

3G-SDI (3G): Meets SMPTE ST 424 and 425 when frame rates > 30 Hz

HD-SDI (1.5G): Meets SMPTE ST 292 when frame rates < 30 Hz

HD (1080p): SMPTE ST 274

Genlock In 1x BNC, 75 Ω

Timecode In 1x BNC, 75 Ω

SMPTE ST 12-2

Power Consumption Approximately 15 W

DSMC Compatibility RED DRAGON sensor based ONLY (NOT MYSTERIUM-X)

Firmware Requirement 5.2.28 or later

1. Each SDI-OUT connector sends one (1) quadrant of the UHD video.

2. Applicable to each SDI-OUT connector.

3. Applicable to the full 4K UHD video.

TECHNICAL

SPECIFICATIONS