Instruction manual

Operation & Service

Page

Chapter

Vögtlin Manual

red-y compact series

Version

compact_E4_0

Battery Replacement

If ‘low bat’ appears in the display, we recommend that you change the battery or at least have a

new battery module available (Art. Nr. 328-2211). This module can be obtained from your

Insentys

sales partner. We recommend the following procedure with the replacement of the battery:

Changing the battery requires no tools at all. The battery module snaps into two lateral housing

clips. Hold the measuring device firmly with one hand on the main body (metallic part) and pull the

battery module out toward the back, keeping it as level as possible.

Then, place the new module in as straight as possible from the back, and press in the direction of

the measuring device until it snaps into the clips.

After the battery is changed, the device goes through a self-test and is then ready for use.

Replacement of battery module

Verbrauchte Batterien gehören aufgrund ihres hohen Schwermetallgehaltes nicht in den

Hauskehricht. Bitte übergeben Sie diese den entsprechenden Sammelstellen, damit sie dem

Recycling-Prozess zugeführt werden können.

Returns

With the return of a measurement or regulation device, use the original packaging if possible, or

other appropriate packing. Please inform us of the reason for the return in order to spare any

unnecessary callbacks and delays.

Should the device come in contact with dangerous substances, please clean the device

carefully, notify us and pack the device tightly.

Please fill out the contamination statement. You will find this in the annex on page 21 or on

the enclosed CD.

If you have any further questions, please contact your sales partner.