User guide

3434
8-MENU ITEMS AND OPERATION8-MENU ITEMS AND OPERATION
c - Feed screw loading
Allows to ll the pellets loading system. It can only be activated with the boiler switched o, it displays an 180” countdown after which
the feed screw stops automatically, as when exiting the menu.
To select “Feed screw loading” (only when the boiler is switched o) act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “Feed screw loading” using the arrows.
• Press “menu” to conrm.
• Select “Enable” with the + - keys.
• Press “menu” to conrm and “esc” to exit.
d - Tones
This function is disabled by default, so to enable act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “tones” using the arrows.
• Press “menu” to conrm.
• Select “On” with the + - keys.
e - External thermostat (see relative chapter)
EXTERNAL THERMOSTAT (not included with the boiler, to be provided by the user)
The temperature of the boiler can also be controlled by an external room thermostat. It is located in a central position of the room where
the boiler is installed. It provides a closer match between the heating temperature requested of the boiler and what it actually provides.
Connect the cables from the external thermostat to points 1-2 of the terminal block on the boiler.
Once the thermostat has been connected one must enable it.
In order to do this, proceed as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows.
• Select by pressing “menu”.
• Scroll once again to “External thermostat” using the arrows.
• Select by pressing “menu”.
• Press the - + buttons.
• Select “On” to activate the external thermostat.
• Press the “menu” button to conrm.
• Press the “esc” button to exit.
f - Auto-Eco activation
To select the Auto-Eco function act as follows:
• Press the “menu” button.
• Scroll to “Settings” using the arrows
• Press “menu” to conrm.
• Scroll to “Auto-Eco” using the arrows.
• Press “menu” to conrm.
• Select “On” with the + - keys.
• Press “menu” to conrm and “esc” to exit.