User guide
4444
8-MENU ITEMS AND OPERATION8-MENU ITEMS AND OPERATION
IMPORTANT NOTE: FOR ELECTRICAL CONNECTIONS CONSULT CHAPTER “14-WIRING DIAGRAM” OF THIS MANUAL.
The water pressure switch cables provided in the boiler must be connected to the hydraulic kit (optional).
The ow switch cables provided in the boiler for the connection to the hydraulic kit (optional) with domestic water.
START-UP
Press key 1 (esc) to begin start-up, the control panel displays ON with a ashing ame. When the ame stops ashing the boiler has
reached the “power output” operating mode.
The room temperature set by default is 20°C, if one wishes to change it act as instructed in the adjustments menu; act likewise to set the
heating water temperature and the room fan speed. To activate external thermostat if any see the relative section.
POWER OUTPUT
Once the start-up stage is complete the control panel will display ON with a xed ame at level 3 . The subsequent ame modulation
at lower or higher powers is managed autonomously and upon reaching the temperatures set in the “System conguration”.