User guide

18
3-DRAWINGS AND TECHNICAL SPECIFICATIONS
TECHNICAL CHARACTERISTICS COMPACT 35 HYDRO
Product class (EN 303-5:2012) 5
Nominal thermal power to rebox 34,5 kW (29670 kcal/h)
(Max) nominal output power: 32,0 kW (27520 kcal/h)
Minimum output power 8,1 kW (6966 kcal/h)
Eciency at Max 92,8%
Eciency at Min 90,0%
Temperature of exhaust smoke at Max 140°C
Temperature of exhaust smoke at Min 60,5°C
Maximum temperature that can be set 80°C
Maximum operating temperature 95°C
Particulate/OGC / Nox (10%O
2
) 23 mg/Nm
3
- 2 mg/Nm
3
- 196 mg/Nm
3
CO at 10% O
2
at Min and at Max 0,014 - 0,005%
CO
2
at Min and at Max 5,6 - 10,3%
Recommended draught at Max power 0.10 mbar - 10 Pa
Recommended draught at Min power 0.05 mbar - 5 Pa
Mass of smoke 21.5 g/sec
Hopper capacity 146 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 5/30 mm
Pellet hourly consumption Min ~ 1.3 kg/h* - Max ~ 6.7 kg/h*
Autonomy At min ~ 80 h* - At max ~ 16 h*
Heatable volume m3 688/40 - 786/35 - 917/30**
Water content 30 litres
Maximum operating pressure 3 bar - 300 kPa
Combustion air inlet External diameter 80 mm
Smoke outlet External diameter 100 mm
Air inlet 100 cm
2
Nominal electrical power (EN 60335-1). 190 W (Max 440 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 300 kg
Weight with packaging 320 kg
* Data that may vary depending on the type of pellets used.
**Heatable volume based on the requested power per m3 (respectively 40-35-30 Kcal/h per m3)