User guide

33
8 - MENU ITEMS AND OPERATION
Technical Dept. - All rights reserved - Reproduction is prohibited
SETTINGS MENU
The SETTINGS menu allows to act on the boiler operating mode:
a. Language.
b. Cleaning (displayed only when the boiler is switched o).
c. Feed screw loading (displayed only when the boiler is switched o).
d. Tones.
e. External thermostat (activation).
f. Auto Eco (activation).
g. Eco-Shutdown T (default 10 minutes).
h. pump on T (default 50°C).
i. Auxiliary boiler (default active).
j. Pellet recipe.
k. Smoke rpm % ventilation.
l. Maximum power (1-5 - default 5).
m. Components test (displayed only when the boiler is switched o)
n. "Chimney sweep" function (activated only when the boiler is switched on, for eld emissions test).
o. System conguration (factory setting: system 02).
p. Season.
q. Technical menu.
NOTE: Some of the items listed above cannot be activated in certain "system congurations".
a - Language
To select the language act as follows:
• Press the “menu” button.
• Scroll to "Settings" using the arrows
• Press "menu" to conrm.
• Scroll to "language" using the arrows.
• Press "menu" to conrm.
• With the + - keys select the language of interest (IT/EN/DE/FR/ES/NL/PL/DA)
• Press "menu" to conrm and "esc" to exit.
b - Cleaning
This function is only enabled when the boiler is o. When the fan is enabled it turns at maximum speed so as to extract the soot that has
been removed with the turbulators during the cleaning phase.
To select "Clean" act as follows:
• Press the “menu” button.
• Scroll to "Settings" using the arrows
• Press "menu" to conrm.
• Scroll to "Cleaning" using the arrows.
• Press "menu" to conrm.
• Select "On" with the + - keys.
• Press "menu" to conrm and "esc" to exit.