User guide

52
F
D
A
C
B
I
G
H
E
V
V
10-MAINTENANCE AND CLEANING
PERIODIC CLEANING PERFORMED BY A QUALIFIED TECHNICIAN
CLEANING THE EXCHANGER AND PIPE UNIT
CLEANING THE UPPER COMPARTMENT
When the boiler is cool, lift the front cover “I”; unscrew the screws on the rod “D” to clean the pipe unit and take out the two beams “A”.
Now take o the cover “B”. Then, take o screws “V” (two on the right and two on the left) that hold the turbulators to the boiler.
At this point, remove the four turbulators “C” and using a rigid rod or a bottle brush, clean the internal pipe unit and the turbulators,
removing all of the accumulated ash.
Check the cover gasket and replace it if necessary.