Specifications

RED SCARLET-X OPERATION GUIDE

955-0003_v4.0, Rev-A | 133

PRE-RECORD

When enabled, the Pre-Record setting continuously captures a cache of footage before you start recording.

You can select to have 4-30 seconds (incremented at an interval of 2 seconds) of pre-record time added to

your actual footage. When Pre-Record is enabled, you won't miss the start of a shot by being a little slow on

the trigger.

To enable Pre-Record, you can do any of the following:



Select the ALWAYS TRIGGER PRE-RECORD BEFORE RECORDING check box



Click TRIGGER PRE-RECORD NOW



Map Pre-Record to a key (SETTINGS > SETUP > KEYS > RECORD: START PRE-RECORD)

SETUP

This menu permits a variety of system setup tasks to be accomplished. Options available are KEYS /

SHORTCUTS, DATE / TIME, NETWORK, SERIAL, REMOTE, GPIO, and SYSTEM.

KEYS

Use Keys function to customize the assignment of DSMC camera controls.

KEY MAPPING AND SOFT KEYS

With Key Mapping, you press the key you want to change and follow on-screen instructions to complete the

change.

When the Key Mapping tab is highlighted:



Press the camera key you want to change.



Use the pull down to select the desired function



Press menu or a blank area of the touchscreen to save the setting