Specifications

RED SCARLET-X OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0003_v4.0, Rev-A | 137
communication link.
SERIAL PROTOCOL
The camera can communicate to external devices via RS232 Serial Port and / or the Gigabit Ethernet Port.
This selection allows the user to specify the serial communications PROTOCOL. Available options are:

NONE (default)

ELEMENT TECHNICA

3ALITY SPC 7100

3ALITY SPC 7000

RED Control Protocol

RCP 3D Metadata
NETWORK
If the Gigabit Ethernet port is used, additional settings are required. Each camera or device requires a
unique IP ADDRESS. For simple camera-to-camera communication via Ethernet, both cameras need to be in
the same sub-net.
Use the same sub-NETMASK and GATEWAY addresses and the first three groups of the IP address need to
be the same.