Specifications

RED SCARLET-X OPERATION GUIDE

955-0003_v4.0, Rev-A | 187

•

Single frame stills mode

NOTE: Even if audio is not recorded (in varispeed, single frame, timelapse, or ramp mode), audio will be

passed through to the headphones.

PEAK METER

The peak meters always show the incoming audio signal, no matter if the channel is recorded or not, as long

as a source is selected.

Actively recorded channels are drawn with a lighter outline and the channel indicator left of the peak meter

will be green.

The peak meters are updated 12 times per second with the maximum signal from the last 1/12 of a second

period. In case the input signal exceeds 19dBu the whole bar will be filled with red.

The total range of the peak meter is -36 dB to 20dB. (Values below 0 dB are shown with half resolution) For

reference the following markers are supplied on the peak meter: Solid marker at 0 dB, Dashed marker at

4,10,14,18 dB.

Channel 1/2 Enabled for Recording

Channel 1 Around 5dB

Channel 2 Clipping