Manualshelf

Specifications

ManualsBrandsRED ManualsDigital CameraDSMC SCARLET
211212213214215216217218219220
RED SCARLET-X OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0003_v4.0, Rev-A | 218
16.
Select the Start Menu folder you would like to create the shortcut and click Install.
17.
Click Close after setup was completed successfully.
18.
Proceed to Configure REDMOTE Connection with Computer (Windows) on 218.
CONFIGURE REDMOTE CONNECTION WITH COMPUTER (WINDOWS)
The next step in upgrading REDMOTE firmware is to establish communication between the computer and the
REDMOTE.
1.
Connect a USB to mini-USB cable between the PC and the USB connector on the REDMOTE
2.
If connecting for the first time, a RNDIS/Gadget driver will be installed on the system
3.
When the driver is installed, the battery charge indicator will flash on the REDMOTE
NOTE: If the REDMOTE will not connect to the PC, please refer to the read_me_installing_redmote_vX.X.XX
file in the REDMOTE_Firmware_vX.X.XX folder for manual setup of network connection instructions or
contact RED SUPPORT for assistance (http://www.red.com/contact_us).
4.
Open the REDMOTE_update program from the Start Menu folder you created the shortcut for
5.
Click on Connect to establish communication between the REDMOTE and REDMOTE_update