Specifications

RED SCARLET-X OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0003_v4.0, Rev-A | 68
MAIN MENU
Available options under the MAIN MENU are FRAMERATE (FPS), ISO (SENSITIVITY), F STOP, 1/SEC
(EXPOSURE), WHITE BALANCE, RESOLUTION, and QUALITY (REDCODE).
FPS
FPS is used to select an image capture frame rate that differs from the Project’s TIME BASE frame rate.
If using a Touch Screen, select SECONDARY MENUS > SETTINGS > PROJECT > TIME BASE. Adjust by
sliding your finger up / down or tapping on the desired value, and then press anywhere else on the touch
screen to confirm.
The following TIME BASES are currently available:

23.98 fps

24.00 fps

25.00 fps

29.97 fps

47.96 fps

48.00 fps

50.00 fps

59.94 fps
VARISPEED
When a frame rate other than the current TIME BASE has been selected, the FPS text will turn Yellow and
VARISPEED will be shown where the Audio Meter is normally displayed at the lower right of the display.
NOTE: Audio is not recorded in VARISPEED mode.