Specifications

COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.2, REV-C | 42
battery capacity and the displayed text is color coded as follows:
 Green: >10 minutes
 Yellow: 5-10 minutes
 Red: <5 minutes
RAW CLIP METER
The RAW Clip meter looks a traffic light style meter and indicates if either of the Red, Blue or Green channels
of the RAW sensor data are clipping. This meter is unaffected by White Balance, ISO, VIEW or LOOK settings
and therefore represents a true measurement of the exposure levels of the sensor at all times.
RAW NOISE LEVEL BAR
The RAW noise bar displays the amount of pixels in the image that are in noise. For example, if the bar is about
1/8 of the total height, this would indicate approximately 1/8 of the total pixels in the image are at an exposure
level at risk of displaying noise when pushed at higher ISO or FLUT values in post-production.
RAW CLIP LEVEL BAR
The RAW clip level bar displays the amount of pixels in the image that are clipping. For example, if the bar is
about 1/4 of the total height, this would indicate approximately 1/8 of the total pixels in the image are at an ex-
posure level at risk of clipping and may not be recoverable by lowering ISO or FLUT values in post-production.
DSMC SIDE HANDLE
As you navigate and adjust settings in the Basic Menus they will be reflected on the DSMC SIDE HANDLE LCD
display.
The display elements include:
 Frame Rate: Image capture rate
 ISO Rating: Camera sensitivity
 Power: Camera power status (DC Shown)
 REDCODE: REDCODE setting
 Resolution: Recording Resolution
 Shutter Speed: Exposure time or shutter angle
 White Balance: Color Temp
REDMOTE
The display elements include:
 Battery Indicator: Displays battery life or charge status (shown) of REDMOTE
 Camera ID: Displays camera ID (DEFAULT shown)
 Clip Filename: Filename of the clip that will be shot
 Clip Meter: RGB sensor RAW clipping status
 False Color Mode: Displays false color overlay mode
 Frame Rate: Current frame capture rate
 Genlock: Indicates presence of valid Genlock signal/HD-SDI sync to genlock
 HDR Mode: Displays HDRx mode status
 Histogram: RGB Histogram
 ISO: Camera sensitivity
 LAN: Indicates communication via Ethernet connection