Specifications

225

4. Power up the camera.

5. Power up RED Focus. Refer to POWER UP / DOWN.

NOTE: Remember that RED Focus will AUTOMATICALLY power down after 3 minutes. Press

the Red button on the front to power back up.

6. Set the camera to Magnify. Go to SECONDARY MENUS > SETTINGS > DISPLAY > FALSE COLOR

> MAGNIFY.

NOTE: The “Focus” option located under SECONDARY MENUS > SETTINGS > DISPLAY >

FALSE COLOR > FOCUS can serve as a good double-check for proper focus during this

procedure.

RED Focus Displayed Image on Camera

7. Insert a T-10 Torx screwdriver into the back focus adjustment screw. The screw is oriented at

approximately 80° as shown.

Performing Back Focus Adjustment

8. Carefully and slowly, rotate the back focus adjustment screw to achieve optimum focus.

- Turning CLOCKWISE moves the sensor forward.

- Turning COUNTER-CLOCKWISE moves the sensor rearward.