Specifications

AC POWER ADAPTOR - (DSMC)

When powering from the Module it is called in the lower UI as Rear Module (RM Bx) Bay number on lower

UI, and identified as Rear 1-4 in the POWER status menu.

In use, an LED on the Quad Battery Module will flash to show the battery currently powering the camera.

Current battery LED indicates status as follow:

• LED Off = No Battery

• LED Constant Green = Battery Not used but Charged

• LED Green Blinking = Battery Used (100% - 11%)

• LED Yellow Blinking = Battery has 10 minutes of run time remaining

• LED Red Blinking = Battery has 5 minutes of run time remaining

• LED Constant Red = Battery Discharged

Remaining batteries will have a steady LED on module.

When current battery reaches 4% charge, the battery module will automatically switch over another

battery, by default the LOWEST charge capacity battery of the remaining batteries installed in the Module.