Specifications

PERFORM A BLACK SHADING CALIBRATION

Refer to SECONDARY MENUS > SETTINGS > MAINTENANCE > CALIBRATION for complete details for

performing a Black Shading Calibration.

ADJUST PROJECT SETTINGS

TIME BASE

To adjust the project TIME BASE, press the MENU button on the Side Handle or REDMOTE. Then use the

Scroll Wheel or Direction Keys to navigate to SETTINGS > PROJECT > TIME BASE and press ENTER.

Adjust to the desired value using the Scroll Wheel and press ENTER once more to confirm.

If using a Touch Screen, select SECONDARY MENUS > SETTINGS > PROJECT > TIME BASE. Adjust by

sliding your finger up / down or tapping on the desired value, and then press anywhere else on the touch

screen to confirm.

The following TIME BASES are currently available:

• 23.98 fps

• 24.00 fps

• 25.00 fps

• 29.97 fps

• 47.96 fps

• 48.00 fps

• 50.00 fps

• 59.94 fps

NOTE: A project can only support one Time Base as this defines the frame count to be used for

time code and as the clip playback and editing frame rate. It is also the primary frame rate for

acquisition, but variable speed (over-crank and under-crank) recordings can be made above and

below this base frame rate using the VARISPEED menu.