Specifications

80 80

MODE

MANUAL FOCUS

To adjust the MODE parameter, select the Menu box and use the UP / DOWN arrows to adjust.

Available options are MANUAL and CONFIRM. Default is MANUAL.

MANUAL

When selected all focus operations are manual.

CONFIRM

Enables the Center or Spot focus square for use with manual focus. This mode provides additional

focus assistance to the photographer using RED, YELLOW, and GREEN color changes to the focus spot

window. Inadequate subject illumination and/or contrast may interfere with normal Focus Confirm

operation.

For best results with Focus Confirm, operators should 'rock' the focus ring -- focusing through the point

of optimum focusing and back again in decreasing amplitude -- as when 'zeroing-in' for precision

manual focus.

AUTO FOCUS

NOTE: The following menus will ONLY appear if a DSMC Canon Mount is installed with a Canon

or Sigma lens attached.

With a DSMC Canon Mount installed and a supported lens attached, available options become

MANUAL, CONFIRM, SINGLE, CONTINUOUS, TOUCH TRACK, and RACK. Default is MANUAL.

All settings except MANUAL place a single square (Center) or a single rectangle (Spot) on the screen

(depending on the ZONES selection) that indicate where the image is in focus.

Pressing the designated button for spot focus (REDMOTE / Side Handle button A default) will cycle you

through each Focus Mode option in order as you press the button repeatedly.