Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-G | 94

PRO I/O GPIO AND PRO I/O SW

Use the PRO I/O GPI and PRO I/O SW menus to map input and output (I/O) actions to the GPIO and AUX

connectors on the Pro I/O Module.

Low and High refer to the voltage. In practice, Low/High correlate to the press/release of a trigger or the on/

off position of a switch.

 Low: The falling edge (transition from high voltage to low voltage).

 High: The rising edge (transition from low voltage to high voltage).

For example, if you connect a start/stop trigger to the GPIO connector on the Pro I/O Module and keep the

default GPIO A High and Low settings (Key Disabled and Record: Toggle, respectively), then pressing the

trigger starts/stops recording.