Instruction Manual

RED DSMC OPERATION GUIDE

DSMC SIDE HANDLE

This section describes the controls and display of the DSMC Side Handle.

# CONTROL/ITEM DESCRIPTION

1 LCD Display Go to “DSMC Side Handle Display” on page 60

2 User Keys (1–4)

1: Move cursor to Frame Rate (FPS) in the Upper Status Row

2: Move cursor to ISO in the Upper Status Row

3: Move cursor to Aperture (F stop) in the Upper Status Row

4: Move cursor to Shutter (Exposure) in the Upper Status Row

3 Menu Button Access menus or exit currently selected menu

4 Rocker Switch Open (Up)/Close (Down) Iris

5 User Keys (5–7) 5: Toggle Exposure Mode on/off

6: Key Disabled

7: Eject Media

6 Thumbwheel Lock Install and remove the DSMC Side Handle

7 LCD Backlight Button Toggles LCD backlight illumination

8 Navigation Group Navigate menus and menu items; go to “Navigation Group” on page 58

9 User Keys (A–D) A: Cycle Auto-Focus Mode

B: Auto White Balance

C: Toggle 1:1 Magnify on/off

D: Toggle Exposure Mode on/off

10 Rotary Dial Select and adjust camera paramter values, similar to the Scroll Wheel in the

Navigation Group

11 Stills/Movie Mode Switch Currently disabled in firmware

12 Battery Door Release Press to open the battery door

13 PC Sync Port Triggers external flashes or strobes

14 Focus/Record Button Half-press for auto-focus; full press to Start/Stop Record

1. Press User Keys 1 + 4 simultaneously to lock/unlock DSMC Side Handle buttons to prevent inadvertent menu changes.

NOTE: DSMC Side Handle keys are programmable. For more information, go to “Key Mapping” on page 96.

DSMC Side Handle

Controls