Instruction Manual

COPYRIGHT © 2015 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.3, REV-J | 68
FREQUENCY
Determines the monitor frequency. Available frequencies depend on the selected monitor. For HD-SDI monitors,
the frequency depends on the project time base. For more information, go to “HD-SDI Out” on page 188 and
“HDMI Out” on page 189.
CURVE
Determines which curve the camera applies to the monitor when using the Independent Display LUT feature.
For more information, go to “Independent Display LUT” on page 76.
TOOLS
Enables the false color modes on the monitor. For more information, go to “Tools” on page 64.
FLIP/MIRROR UI
NOTE: This setting is NOT available on the RED Touch 7.0" LCD. For more information, go to “Flip Mirror” on
page 68.
Flip the graphical user interface (GUI) vertically and mirror horizontally (not rotated). Use this setting when
mounting a monitor upside down. This setting only affects the monitor, and does not affect captured footage.
FLIP VIDEO
NOTE: This setting is NOT available on the RED Touch 7.0" LCD. For more information, go to “Flip Mirror” on
page 68.
Flip footage horizontally, so that it is upside down. This setting only affects the monitor, and does not affect
captured footage.
FLIP MIRROR
NOTE: This setting is ONLY available on the RED Touch 7.0" LCD.
Mirror and flip (invert) the graphical user interface (GUI) and footage, effectively rotating the entire displayed
image 180°. Use this setting when mounting a monitor or the entire camera rig upside down. This setting only
affects the monitor, and does not affect captured footage.
FRAMED OVERLAY
The video display is scaled down on the monitor so that the overlay items fit outside of the video area rather
than over it. This setting only affects the monitor, and does not affect captured footage.
AUTO HIDE MENUS
Hides the Upper Status Row and Lower Status Row. When this option is disabled, the video is scaled so that
the menus are not overlaid on the video. When this option is enabled, the video is not scaled. This options lets
creates a control surface on a monitor without to scaling the video. This setting only affects the monitor, and
does not affect captured footage.
To toggle display/hide the menus when Auto Hide Menus is enabled, perform either of the following actions:
 Press the Menu button on the DSMC Side Handle.
 Tap the touchscreen.
NOTE: Enabling this option on a non-control surface results in the menus never displaying on that monitor.