Technical data

Version 3.0
955-0003_V3.0, REV-A ©2011-2012 RED.COM INC.
117
NOTE: Some HDMI monitors may have trouble when "AUTO" is selected. In these cases, it is
recommended to manually select the maximum monitor resolution provided.
HD-SDI
Options are OFF, MENUS, PREVIEW, CLEAN, OVERLAY, 3D LEFT, and 3D RIGHT.
RES
Allows you to choose the output resolution for HD-SDI monitors. Available options are AUTO, 720p and
1080p.
FREQ
Allows you to choose the output frequency in Hertz (Hz) for HD-SDI monitors. Available options are
AUTO, 23.976/24, 25, 29.976, 47.952/48, 50, and 59.94.
AUTOMATICALLY ASSIGN MENU SCREEN IF ENABLED
When checked will assign an attached external monitor to display the menus if none are selected.
TEST SIGNALS
Permits the video monitor outputs to be replaced with a video test pattern. Available test patterns are
CHIP CHART and SMPTE BARS.
To enable a desired test signal, select the desired test signal box. To exit the test signal, tap the
touchscreen one time or press the Enter or Menu button on the Side Handle or REDmote.
CHIP CHART
SMPTE BARS